Harvesters for Sale in Werombi NSW | LocalAg Marketplace
Welcome to LocalAg

New and existing customers

chat with kev
Within 50km
Within 50kmWithin 250kmWithin 500kmWithin 1000km

333 Results

Headers & Harvesters in Werombi NSW

Featured
FeaturedPrice (Low to high)Price (High to low)Date (Newest)Date (Oldest)Year (Newest)Year (Oldest)Hours (Low to high)Hours (High to low)
All Listings
All ListingsFor SaleWanted
Featured
FeaturedPrice (Low to high)Price (High to low)Date (Newest)Date (Oldest)Year (Newest)Year (Oldest)Hours (Low to high)Hours (High to low)

Filter

Location:

Show all

Werombi NSW

Categories:

Show all
category svg

Machinery & Supplies

Sub Categories:

Reset

Headers & Harvesters

Filter & Refine:

Reset all

Sub-type:

Brand / Make:

Condition:

State:

Advanced Search:

Reset all

Advertisements

333 results

Item Image
#98900
100
units
available
Discount Combine Parts
Ex Farm Price
$7 / each
Excl. GST
Aftermarket retractable auger finger designed for John Deere grain headers. Built as a durable replacement for the OEM finger that extends and retracts inside the header auger to pull crop material toward the feederhouse, this component restores smooth feeding and reduces plugging in heavy crop conditions. Installed inside the auger tube, it ensures consistent crop flow and improved header performance. Type: Retractable auger finger — heavy-duty polymer finger with steel core insert Extends and retracts in the auger to guide crop material evenly into the feederhouse, improving feeding and reducing header vibration Replaces OEM: H169914 Suits: John Deere 600 Series and 900 Series grain headers, including 620F, 625F, 630F, 635F, 640F, and equivalent auger-fed platforms (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-H169914 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98899
100
units
available
Discount Combine Parts
Ex Farm Price
$14 / each
Excl. GST
Heavy-duty aftermarket high-arch hold-down clamp designed to replace OEM AH218548 on John Deere equipment. Built from hardened, wear-resistant steel with a raised arch profile to provide strong hold-down force while maintaining clearance around auger fingers and knife sections. Engineered to prevent material snagging and ensure smooth crop flow. Type: High-arch hold-down clamp – auger / header / knife-support system Secures knife sections, guides, or auger fingers in place while allowing proper clearance for movement and crop feeding. The high-arch profile prevents rubbing, reduces crop buildup, and maintains reliable cutting or feeding performance under heavy harvest loads. Replaces OEM: AH218548 (John Deere) Suits: Used across multiple John Deere headers and feeder systems. Fitment depends on header series, auger setup, and knife-drive configuration. (Can provide exact compatibility if you want the full run.). Please confirm fitment. Part no: DCP-AH218548 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98898
100
units
available
Discount Combine Parts
Ex Farm Price
$6 / each
Excl. GST
Aftermarket retractable auger finger designed for John Deere grain platforms. Built as a direct replacement for the OEM finger that extends and retracts inside the header auger, this component helps pull crop material evenly toward the feederhouse. Installed along the auger tube, it improves feeding consistency, reduces bunching, and supports smooth header performance in varying crop conditions. Type: Retractable auger finger — durable polymer/nylon finger with metal core Extends and retracts within the auger to guide crop material toward the feederhouse, improving feeding efficiency and reducing header vibration Replaces OEM: H102724 Suits: John Deere 200 Series, 900 Series, and select early 600 Series grain headers using the H102724 finger design (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-H102724 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98897
100
units
available
Discount Combine Parts
Ex Farm Price
$11 / each
Excl. GST
Aftermarket hold-down clamp designed for JD combines. This clamp secures the sieve and cleaning shoe components in position, ensuring stable operation during high-vibration harvesting. Built as a durable replacement for the OEM clamp, it maintains correct alignment of the cleaning system and prevents unwanted movement or wear. Type: Hold-down clamp — formed and machined steel Secures sieve and cleaning shoe components, maintaining proper alignment and reducing vibration-related wear Replaces OEM: AH218547 Suits: JD 9650STS, 9660STS, 9670STS, 9750STS, 9760STS, 9860STS; JD S550, S650, S660, S670, S680, S690 (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-AH218547 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98896
100
units
available
Discount Combine Parts
Ex Farm Price
$1,001 / each
Excl. GST
Premium aftermarket centre draper belt designed for MacDon draper fronts. Built as a high-strength replacement for the OEM centre belt, this MFCB belt delivers excellent traction, consistent crop conveyance, and long wear life under demanding harvesting conditions. Installed on the centre draper conveyor system, it moves cut crop material from both side belts toward the feederhouse, ensuring smooth, even feeding and reducing crop bunching. Type: Centre draper belt — reinforced heavy-duty rubber with strong internal fabric layers Transfers crop material from the side draper belts to the feederhouse intake, maintaining smooth centre feeding and preventing slippage or belt tracking issues Replaces OEM: 87560973, 133131 Suits: MacDon FD70, FD75, FD1, and other draper fronts using the centre draper belt 87560973 / 133131 (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-87560973 macdon belt Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98895
100
units
available
Discount Combine Parts
Ex Farm Price
$3 / each
Excl. GST
Aftermarket knife section designed for Case IH grain platforms. Built as a durable replacement for the OEM sickle section used on cutterbar knife assemblies, this serrated blade provides clean cutting performance in cereals, soybeans, canola, and tough or fibrous crop conditions. Installed across the cutterbar, it restores smooth knife operation, reduces plugging, and supports consistent feeding into the header and feederhouse. Type: Knife section — hardened steel with serrated cutting edge Provides the primary cutting action along the cutterbar, ensuring a clean cut and efficient crop flow toward the header auger or draper belts Replaces OEM: 112074A1 Suits: Case IH grain platforms and cutterbar assemblies that use the 112074A1 knife section (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-112074A1 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98894
100
units
available
Discount Combine Parts
Ex Farm Price
$3 / each
Excl. GST
Aftermarket pipe reel bearing kit designed for John Deere grain headers. Built as a direct replacement for the OEM reel support bearings used inside the pipe reel tube, this kit restores smooth reel rotation and reduces vibration in varying crop conditions. Installed at the reel support points, it ensures stable reel movement, improved crop pickup, and reduced wear on the reel shaft and bat assemblies. Type: Pipe reel bearing kit — sealed precision bearings with mounting hardware (kit contents vary by application) Supports and stabilises the reel pipe, ensuring smooth rotation and consistent crop lifting performance across the full width of the header Replaces OEM: H136954 Suits: John Deere 200 Series, 900 Series, and select 600 Series grain platforms using the H136954 reel bearing configuration (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-HALF MOON KIT Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98893
100
units
available
Discount Combine Parts
Ex Farm Price
$10 / each
Excl. GST
Suits John Deere 600 and 700 Series flex fronts. Aftermarket forged knife guard replacing OEM H213507 — forged steel flex-platform guard, fits where H213398 does not. Type: Forged knife guard (flex platform) — heavy-duty forged steel Guides crop into the knife sections on flex-style platforms. Forged construction provides superior rock resistance. Designed for flex-header applications where ground following requires specific guard geometry. Replaces OEM: H213507 Suits: John Deere 600 Series and 700 Series flex grain platform fronts — confirm fitment against H213398 before ordering as applications differ. Please confirm fitment. Part no: DCP-H213507 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98892
100
units
available
Discount Combine Parts
Ex Farm Price
$10 / each
Excl. GST
Suits John Deere 600 and 700 Series grain fronts. Aftermarket forged knife guard replacing OEM H213398 — forged steel for superior impact resistance in rocky Australian paddock conditions. Type: Forged knife guard — heavy-duty forged steel Guides crop into the knife sections and protects the cutterbar from impact damage. Forged construction provides superior rock resistance over cast alternatives. Replaces OEM: H213398 Suits: John Deere 600 Series and 700 Series grain platform fronts including 620F, 625F, 630F, 635F, 640F, 645F. Please confirm fitment. Part no: DCP-H213398 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98530
100
units
available
Discount Combine Parts
Ex Farm Price
$8 / each
Excl. GST
Aftermarket adjustable two-piece retractable finger holder, a direct replacement for OEM 84991264D. It carries the retractable auger finger. Suits: New Holland fronts. Please confirm fitment. Part no: DCP-84991264D Price is each, excluding GST (on sale, normally $16.50). Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98529
100
units
available
Discount Combine Parts
Ex Farm Price
$3 / each
Excl. GST
Aftermarket outer finger guide top retainer, a direct replacement for OEM H217264. It caps and retains the retractable finger guide and holds the guide ball in place. Suits: John Deere 600 Series draper headers. Please confirm fitment. Part no: DCP-H217264 Price is each, excluding GST (on sale, normally $4.40). Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98528
100
units
available
Discount Combine Parts
Ex Farm Price
$4 / each
Excl. GST
Aftermarket inner finger guide bottom retainer, a direct replacement for OEM H169912. It seats and retains the retractable finger guide from the inner side. Suits: John Deere 600 Series draper headers. Please confirm fitment. Part no: DCP-H169912 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

HEADERS & HARVESTERS IN WEROMBI NSW

Harvest time demands dependable machinery that performs under pressure. This is the place to buy a harvester that suits your crop or sell a harvester ready for its next farm. Explore listings for new harvesters and used harvesters, including farm harvesters from leading brands. Check specs, hours, and headers to make sure you’re ready for a smooth and efficient harvest season.

General Questions

Can I buy a used harvester or header on LocalAg?

Yes. Used harvesters, headers and the fronts that go with them are listed in the Machinery & Supplies category. You can browse current listings, filter by location and contact the seller directly to ask about hours, condition and service history. Every sale is backed by LocalAg's secure escrow payment system, so your money is protected until the deal is done, which matters on a machine of this value.

What brands of harvesters are listed for sale on LocalAg?

Listings come from farmers and sellers across Australia, so you will find a mix of the major harvester brands across a range of models and ages. Use the search and filters to narrow down to the brand, class size and front type you are after.

Harvesters and headers for sale near me, how do I find one?

Use the radius filter to show machines listed within 50km, 250km, 500km or 1000km of you, or browse the marketplace by map. With harvesters, many buyers look further afield for the right machine and arrange transport, and because secure escrow protects your payment until delivery, buying interstate is straightforward.

Can I sell my harvester or header on LocalAg for free?

Yes. Listing is free, so you can list your harvester, fronts or other gear, along with anything else across the marketplace, and pay nothing until it sells. A small transaction fee applies on a successful sale, split between the buyer and the seller. Full details are on the Fees & Charges page.

Can I buy harvester fronts and headers separately, including draper, stripper and comb fronts?

Yes. Harvester fronts are listed both with machines and on their own, including draper fronts, stripper fronts and comb fronts, along with the trailers to cart them. Search by type and location and confirm the fit with your harvester before you buy, since fronts are matched to specific makes and models.

How does payment work for a high-value harvester purchase on LocalAg?

The same secure system covers a harvester as any other sale. Rather than paying the seller directly, your funds are held in secure escrow and are only released once both sides confirm the transaction is complete, so your money is protected until the machine is yours. For a purchase of this size, LocalAg Plus can also help manage the contract, payment and logistics, which is well worth using on a complex, high-value deal.

Is CheckVault safe to use for a $200,000+ machinery purchase?

Yes. CheckVault is LocalAg's secure escrow partner and an established Australian payment service built for exactly this kind of high-value transaction. Your money is not handed to the seller. It is held in escrow with an independent custodian, Perpetual Corporate Trust, one of Australia's long-standing trustee companies, and is only released once you and the seller both agree the deal is done. CheckVault holds an Australian Financial Services Licence and verifies users' identities to reduce fraud, and if a dispute arises the funds stay held until it is resolved. For a six-figure harvester, that independent protection is exactly what takes the risk out of paying someone you may not have dealt with before.

How do I transport a harvester I buy on LocalAg?

Harvesters are large, often oversize loads, so most buyers arrange specialist transport with an experienced ag machinery carrier. You can organise your own freight, or for a purchase like this LocalAg Plus can help manage logistics and transport as part of the deal. Because your payment is held in secure escrow until the machine is delivered and confirmed, you can buy interstate with confidence, which matters when the best harvester for your program is in another state. National reach is one of the platform's strengths.

What should I inspect before buying a second-hand harvester?

Before you buy, it pays to check:


  1. Engine and separator or rotor hours, along with full service history
  2. The threshing and separation system, including the rotor or drum, concaves and sieves, since this is the heart of the machine and the single most important area to get right
  3. Wear points such as the feeder house, augers, elevators and chains
  4. The front and any included attachments, and that everything matches the listing


For a machine at this value, an independent pre-purchase inspection by a specialist is well worth it. Because you deal directly with the seller on LocalAg, it is easy to request records, photos and an inspection before you commit.

How many hours or hectares should a good used harvester have done?

Harvesters are usually judged on engine hours and separator or rotor hours, and sometimes on hectares or acres harvested. As a rough guide, under about 2,000 to 3,000 separator hours is considered moderate for a modern machine, while much higher counts point to heavier use. Hours and area matter less than how the machine has been maintained and stored, so always weigh them against service history and condition.

Why buy a harvester on LocalAg instead of Facebook Marketplace or Gumtree?

LocalAg is built by farmers, for farmers, and made specifically for agricultural trading. On a high-value machine that matters: you get verified users, secure escrow payments that protect six-figure sums until the deal is done, and an ag-only audience of genuine growers and sellers rather than anonymous classifieds. You deal directly with the seller, so you can ask the detailed questions a purchase like this deserves.

Is LocalAg run by farmers?

Yes. LocalAg is a family-owned, Australian business backed by Feed Central, with a team that brings together more than 100 years of combined experience in agriculture. It is built by farmers, for farmers, which is why the platform is designed around how farmers actually buy and sell rather than as a generic classifieds site.

An error has occurred. Reload 🗙