Harvesters for Sale in Werombi NSW | LocalAg Marketplace
Welcome to LocalAg

New and existing customers

chat with kev
Within 50km
Within 50kmWithin 250kmWithin 500kmWithin 1000km

333 Results

Headers & Harvesters in Werombi NSW

Featured
FeaturedPrice (Low to high)Price (High to low)Date (Newest)Date (Oldest)Year (Newest)Year (Oldest)Hours (Low to high)Hours (High to low)
All Listings
All ListingsFor SaleWanted
Featured
FeaturedPrice (Low to high)Price (High to low)Date (Newest)Date (Oldest)Year (Newest)Year (Oldest)Hours (Low to high)Hours (High to low)

Filter

Location:

Show all

Werombi NSW

Categories:

Show all
category svg

Machinery & Supplies

Sub Categories:

Reset

Headers & Harvesters

Filter & Refine:

Reset all

Sub-type:

Brand / Make:

Condition:

State:

Advanced Search:

Reset all

Advertisements

333 results

Item Image
#98940
100
units
available
Discount Combine Parts
Ex Farm Price
$7,131 / each
Excl. GST
Aftermarket MasterCut knife drive assembly designed for John Deere grain headers. Engineered as a high-performance replacement for the standard OEM knife drive, this assembly delivers smooth, high-speed oscillation to the cutterbar for clean cutting in tough crop conditions. Installed on the left side of the header, it reduces vibration, improves cutting accuracy, and enhances overall header feeding efficiency. Type: Knife drive assembly — heavy-duty MasterCut gearbox with oscillating drive output Converts rotational drive power into high-speed oscillation to operate the knife sections, ensuring consistent cutting and reduced wear on the cutterbar system Replaces OEM: MasterCut drive assembly (confirm interchange with header model) Suits: John Deere 600 Series and compatible 700 Series grain platforms equipped for MasterCut drive systems (confirm header width and serial-specific fitment). Please confirm fitment. Part no: DCP-MCA40FT Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98939
100
units
available
Discount Combine Parts
Ex Farm Price
$7,780 / each
Excl. GST
Aftermarket MasterCut knife drive assembly designed for John Deere grain headers. Built as a high-performance replacement for the OEM knife drive, this assembly delivers smooth, high-speed oscillation to the cutterbar for clean cutting in all crop conditions. Installed on the left end of the header, it improves cutting efficiency, reduces vibration, and extends the life of knife sections, guards, and drive components. Type: Knife drive assembly — heavy-duty gearbox with oscillating output shaft Converts rotational power into oscillating motion to drive the header knife, ensuring clean cutting and smooth material flow into the feederhouse Replaces OEM: MasterCut-compatible knife drive (confirm interchange with model-specific OEM numbers) Suits: John Deere 600 Series and select 700 Series grain platforms equipped with MasterCut knife drive systems (confirm header width and serial-specific fitment). Please confirm fitment. Part no: DCP-MCA35FT Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98938
100
units
available
Discount Combine Parts
Ex Farm Price
$5,705 / each
Excl. GST
Aftermarket MasterCut knife drive assembly designed for 30ft John Deere draper fronts. Built as a high-performance replacement for the OEM drive system, this assembly delivers smooth, high-speed oscillation to the knife, ensuring clean cutting and consistent crop flow across the full 30ft platform width. Installed on the left end of the draper front, it reduces vibration, improves cutting precision, and maintains reliable performance in heavy crop and high-load harvesting conditions. Type: Knife drive assembly — heavy-duty MasterCut gearbox with oscillating output Converts rotational power into oscillating motion to drive the cutterbar, providing clean cutting action and reducing wear on knife sections and guards Replaces OEM: MasterCut drive assembly (confirm compatibility with existing mounting and knife head) Suits: 30ft John Deere draper fronts including 730D, 735D, 740D, HD30 and equivalent draper platforms using the MasterCut knife drive system (confirm serial-specific fitment). Please confirm fitment. Part no: SKU-DCP-MCA30FT Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98937
100
units
available
Discount Combine Parts
Ex Farm Price
$454 / each
Excl. GST
Aftermarket right-hand 35ft cutter bar designed for John Deere draper fronts. Built as a heavy-duty replacement for the OEM cutter bar section, this RH assembly supports the knife, guards, and hardware along the outer right end of a 35ft draper platform. Installed on the right-hand side of the header, it restores structural integrity, maintains proper knife alignment, and ensures clean, consistent cutting performance across the full platform width. Type: Cutter bar — right-hand 35ft section, reinforced steel cutterbar frame Supports the cutterbar knife and guard system on the RH side, maintaining correct cutting geometry for efficient crop flow into the draper belts Replaces OEM: HXE80879 Suits: John Deere 35ft draper fronts including 735D, 735FD, HD35R, and equivalent platforms using the HXE80879 RH cutter bar (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-HXE80879 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98936
100
units
available
Discount Combine Parts
Ex Farm Price
$142 / each
Excl. GST
Aftermarket knife head built for JD 600 Series platforms. Engineered to replace the OEM head and deliver reliable cutting system performance under demanding harvest conditions. Installed in the cutterbar drive train, this component ensures proper motion transfer to the knife sections and helps maintain consistent cutting results. Type: Knife head — forged steel component Transfers drive motion from the cutterbar drive to the knife section assemblies, sustaining reliable cutting action Replaces OEM: AH227932 Suits: JD 600 Series fronts and headers (620F, 622F, 625F, 630F, 635F) — confirm serial-specific fitment. Please confirm fitment. Part no: DCP-AH227932 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98935
100
units
available
Discount Combine Parts
Ex Farm Price
$128 / each
Excl. GST
Aftermarket knife head built for JD 600 series header platforms. Made as a direct replacement for the OEM unit and engineered for harsh harvest conditions. Installed in the cutterbar drive system, this knife head supports consistent knife movement and helps maintain clean cutting performance across the width of the header. Type: Knife head — heavy-duty forged steel component Supports and drives the knife sections on the cutterbar, ensuring smooth reciprocating action and reducing downtime due to worn parts Replaces OEM: H173723 Suits: JD 600 Series platforms (confirm specific model / serial-break compatibility). Please confirm fitment. Part no: DCP-AH173723 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98934
100
units
available
Discount Combine Parts
Ex Farm Price
$884 / each
Excl. GST
Heavy-duty aftermarket draper drive gear engineered to replace OEM CE21718. Built for long service life in high-load feeding systems on modern JD flex-draper platforms. Type: Draper platform drive gear Transfers drive power from the platform drive shaft to the draper belt system, ensuring smooth, even crop flow into the combine feeder house. Replaces OEM: CE21718 Suits: JD flex-draper platforms including 630FD, 635FD, 640FD, 645FD, 735FD, 740FD, 745FD, RD35F, RD40F, RD45F, RDF35, RDF40, RDF45 — confirm serial-specific fitment.. Please confirm fitment. Part no: DCP-CE21718 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98933
100
units
available
Discount Combine Parts
Ex Farm Price
$30 / each
Excl. GST
Aftermarket knife drive belt designed for John Deere grain platforms. Built as a durable replacement for the OEM belt used in the knife drive system, this component delivers consistent power transfer to the cutterbar, ensuring smooth oscillation and reliable cutting performance. Installed between the knife drive pulley and wobble box, it maintains proper tension, reduces vibration, and supports efficient cutting in a wide range of crop conditions. Type: Knife drive belt — heavy-duty, reinforced V-belt Transfers rotational power to the knife drive system, maintaining smooth and stable cutterbar operation during harvesting Replaces OEM: AH169548 Suits: John Deere 600 Series grain platforms including 620F, 625F, 630F, 635F, 640F, and equivalent headers using the AH169548 knife drive belt (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-AH169548 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98932
100
units
available
Discount Combine Parts
Ex Farm Price
$5 / each
Excl. GST
Aftermarket heavy duty reel pick-up tine built as a direct replacement for OEM 47392794. It lifts and carries down crop into the knife, flexing under load so it rides over obstructions rather than breaking off. Replaces OEM: 47392794 Part no: DCP-47392794 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98931
100
units
available
Discount Combine Parts
Ex Farm Price
$26 / each
Excl. GST
Aftermarket right hand cleaning fan blade built as a direct replacement for OEM 1541560C1. It drives air through the cleaning shoe. Fan blades are handed - this is the right hand blade and should be replaced as a matched set to keep the fan balanced. Replaces OEM: 1541560C1 Part no: DCP-1541560C1 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98930
100
units
available
Discount Combine Parts
Ex Farm Price
$648 / each
Excl. GST
Aftermarket threshing element set designed for JD S-Series combines. Built to replace the OEM rotor elements, this set restores aggressive crop engagement and consistent threshing performance in high-yield or tough residue conditions. Installed along the rotor, these elements help maintain uniform crop flow, improve separation, and reduce rotor losses during demanding harvest operations. Type: Threshing element set — hardened steel, high-wear design Provides the primary threshing action inside the rotor by engaging crop material, separating grain from residue, and supporting high-capacity throughput Replaces OEM: AH216674 Suits: JD S550, S650, S660, S670, S680, S690. Please confirm fitment. Part no: DCP-AH216674 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98929
100
units
available
Discount Combine Parts
Ex Farm Price
$707 / each
Excl. GST
Aftermarket threshing element set designed for JD combines. Built to replace factory rotor elements, this set restores aggressive crop engagement and consistent threshing performance in high-yield or tough residue conditions. Installed along the rotor, these elements help maintain smooth crop flow, improve separation efficiency, and reduce rotor losses during demanding harvest operations. Type: Threshing element set — hardened steel, high-wear design Provides primary threshing action by engaging and separating crop material inside the rotor housing, improving throughput and grain quality Replaces OEM: AH216674 Suits: JD S550, S650, S660, S670, S680, S690 (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-AH216674-ELEMENTKIT Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

HEADERS & HARVESTERS IN WEROMBI NSW

Harvest time demands dependable machinery that performs under pressure. This is the place to buy a harvester that suits your crop or sell a harvester ready for its next farm. Explore listings for new harvesters and used harvesters, including farm harvesters from leading brands. Check specs, hours, and headers to make sure you’re ready for a smooth and efficient harvest season.

General Questions

Can I buy a used harvester or header on LocalAg?

Yes. Used harvesters, headers and the fronts that go with them are listed in the Machinery & Supplies category. You can browse current listings, filter by location and contact the seller directly to ask about hours, condition and service history. Every sale is backed by LocalAg's secure escrow payment system, so your money is protected until the deal is done, which matters on a machine of this value.

What brands of harvesters are listed for sale on LocalAg?

Listings come from farmers and sellers across Australia, so you will find a mix of the major harvester brands across a range of models and ages. Use the search and filters to narrow down to the brand, class size and front type you are after.

Harvesters and headers for sale near me, how do I find one?

Use the radius filter to show machines listed within 50km, 250km, 500km or 1000km of you, or browse the marketplace by map. With harvesters, many buyers look further afield for the right machine and arrange transport, and because secure escrow protects your payment until delivery, buying interstate is straightforward.

Can I sell my harvester or header on LocalAg for free?

Yes. Listing is free, so you can list your harvester, fronts or other gear, along with anything else across the marketplace, and pay nothing until it sells. A small transaction fee applies on a successful sale, split between the buyer and the seller. Full details are on the Fees & Charges page.

Can I buy harvester fronts and headers separately, including draper, stripper and comb fronts?

Yes. Harvester fronts are listed both with machines and on their own, including draper fronts, stripper fronts and comb fronts, along with the trailers to cart them. Search by type and location and confirm the fit with your harvester before you buy, since fronts are matched to specific makes and models.

How does payment work for a high-value harvester purchase on LocalAg?

The same secure system covers a harvester as any other sale. Rather than paying the seller directly, your funds are held in secure escrow and are only released once both sides confirm the transaction is complete, so your money is protected until the machine is yours. For a purchase of this size, LocalAg Plus can also help manage the contract, payment and logistics, which is well worth using on a complex, high-value deal.

Is CheckVault safe to use for a $200,000+ machinery purchase?

Yes. CheckVault is LocalAg's secure escrow partner and an established Australian payment service built for exactly this kind of high-value transaction. Your money is not handed to the seller. It is held in escrow with an independent custodian, Perpetual Corporate Trust, one of Australia's long-standing trustee companies, and is only released once you and the seller both agree the deal is done. CheckVault holds an Australian Financial Services Licence and verifies users' identities to reduce fraud, and if a dispute arises the funds stay held until it is resolved. For a six-figure harvester, that independent protection is exactly what takes the risk out of paying someone you may not have dealt with before.

How do I transport a harvester I buy on LocalAg?

Harvesters are large, often oversize loads, so most buyers arrange specialist transport with an experienced ag machinery carrier. You can organise your own freight, or for a purchase like this LocalAg Plus can help manage logistics and transport as part of the deal. Because your payment is held in secure escrow until the machine is delivered and confirmed, you can buy interstate with confidence, which matters when the best harvester for your program is in another state. National reach is one of the platform's strengths.

What should I inspect before buying a second-hand harvester?

Before you buy, it pays to check:


  1. Engine and separator or rotor hours, along with full service history
  2. The threshing and separation system, including the rotor or drum, concaves and sieves, since this is the heart of the machine and the single most important area to get right
  3. Wear points such as the feeder house, augers, elevators and chains
  4. The front and any included attachments, and that everything matches the listing


For a machine at this value, an independent pre-purchase inspection by a specialist is well worth it. Because you deal directly with the seller on LocalAg, it is easy to request records, photos and an inspection before you commit.

How many hours or hectares should a good used harvester have done?

Harvesters are usually judged on engine hours and separator or rotor hours, and sometimes on hectares or acres harvested. As a rough guide, under about 2,000 to 3,000 separator hours is considered moderate for a modern machine, while much higher counts point to heavier use. Hours and area matter less than how the machine has been maintained and stored, so always weigh them against service history and condition.

Why buy a harvester on LocalAg instead of Facebook Marketplace or Gumtree?

LocalAg is built by farmers, for farmers, and made specifically for agricultural trading. On a high-value machine that matters: you get verified users, secure escrow payments that protect six-figure sums until the deal is done, and an ag-only audience of genuine growers and sellers rather than anonymous classifieds. You deal directly with the seller, so you can ask the detailed questions a purchase like this deserves.

Is LocalAg run by farmers?

Yes. LocalAg is a family-owned, Australian business backed by Feed Central, with a team that brings together more than 100 years of combined experience in agriculture. It is built by farmers, for farmers, which is why the platform is designed around how farmers actually buy and sell rather than as a generic classifieds site.

An error has occurred. Reload 🗙