Harvesters for Sale in North St Marys NSW | LocalAg Marketplace
Welcome to LocalAg

New and existing customers

chat with kev
Within 50km
Within 50kmWithin 250kmWithin 500kmWithin 1000km

13 Results

Headers & Harvesters in North St Marys NSW

Featured
FeaturedPrice (Low to high)Price (High to low)Date (Newest)Date (Oldest)Year (Newest)Year (Oldest)Hours (Low to high)Hours (High to low)Protein (Low to high)Protein (High to low)Metabolizable Energy (Low to high)Metabolizable Energy (High to low)$/kg C.P. (Low to high)$/kg C.P. (High to low)¢/MJ M.E. (Low to high)¢/MJ M.E. (High to low)
All Listings
All ListingsFor SaleWanted

Headers & Harvesters in North St Marys NSW

Filter

Location:

Show all

North St Marys NSW

Categories:

Show all
category svg

Machinery & Supplies

Sub Categories:

Reset

Headers & Harvesters

Showing 13 Results

Featured
FeaturedPrice (Low to high)Price (High to low)Date (Newest)Date (Oldest)Year (Newest)Year (Oldest)Hours (Low to high)Hours (High to low)Protein (Low to high)Protein (High to low)Metabolizable Energy (Low to high)Metabolizable Energy (High to low)$/kg C.P. (Low to high)$/kg C.P. (High to low)¢/MJ M.E. (Low to high)¢/MJ M.E. (High to low)
Item Image
#98530
100
units
available
Discount Combine Parts
Ex Farm Price
$8 / each
Excl. GST
Aftermarket adjustable two-piece retractable finger holder, a direct replacement for OEM 84991264D. It carries the retractable auger finger. Suits: New Holland fronts. Please confirm fitment. Part no: DCP-84991264D Price is each, excluding GST (on sale, normally $16.50). Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98529
100
units
available
Discount Combine Parts
Ex Farm Price
$3 / each
Excl. GST
Aftermarket outer finger guide top retainer, a direct replacement for OEM H217264. It caps and retains the retractable finger guide and holds the guide ball in place. Suits: John Deere 600 Series draper headers. Please confirm fitment. Part no: DCP-H217264 Price is each, excluding GST (on sale, normally $4.40). Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98528
100
units
available
Discount Combine Parts
Ex Farm Price
$4 / each
Excl. GST
Aftermarket inner finger guide bottom retainer, a direct replacement for OEM H169912. It seats and retains the retractable finger guide from the inner side. Suits: John Deere 600 Series draper headers. Please confirm fitment. Part no: DCP-H169912 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98527
100
units
available
Discount Combine Parts
Ex Farm Price
$4 / each
Excl. GST
Aftermarket auger finger retainer, a direct replacement for OEM H172459. It holds and guides the retractable fingers inside the cross auger. Suits: John Deere 600 and 700 Series headers and draper platforms. Please confirm fitment. Part no: DCP-H172459 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98526
100
units
available
Discount Combine Parts
Ex Farm Price
$5 / each
Excl. GST
Hardened steel coarse sickle (knife) section with 4-inch pitch, to replace OEM H163131. A high-wear item we keep in stock in depth. Suits: John Deere 600 Series grain fronts. Please confirm fitment. Part no: DCP-H163131 Price is per section, excluding GST. Buying for a full knife? Message us for a bulk price. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98525
100
units
available
Discount Combine Parts
Ex Farm Price
$3 / each
Excl. GST
Hardened steel coarse knife (sickle) section to replace OEM 87422066. A high-wear item we keep in stock in depth. Suits: MacDon FD draper fronts. Please confirm fitment. Part no: DCP-87422066 Price is per section, excluding GST. Buying for a full knife? Message us for a bulk price. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98523
100
units
available
Discount Combine Parts
Ex Farm Price
$3 / each
Excl. GST
Retractable auger finger guide to replace OEM 1307259C2 (also referenced as 1307259C1 depending on version, and 87620690). Fits: Case IH 1020, 2020, 3020, 820 and similar auger headers using this finger guide. Please confirm serial-specific fitment. Part no: DCP-87620690 Price is per guide, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98522
100
units
available
Discount Combine Parts
Ex Farm Price
$15 / each
Excl. GST
Triple long-short-long finger guard (knife guard) to replace OEM H213405. Fits: John Deere 600 Series and compatible 900 Series grain headers using long-short-long guard setups. Please confirm serial-specific fitment. Size: approx. 285 x 85 x 60 mm. Part no: DCP-H213405 Price is per guard, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98521
100
units
available
Discount Combine Parts
Ex Farm Price
$15 / each
Excl. GST
Short-long-short finger guard (knife guard) to replace OEM H213508. Fits: John Deere 600 Series and select 900 Series grain headers using short-long-short guard setups. Please confirm serial-specific fitment. Size: approx. 265 x 85 x 60 mm. Part no: DCP-H213508 Price is per guard, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98519
100
units
available
Discount Combine Parts
Ex Farm Price
$3 / each
Excl. GST
6-inch (152 mm) plastic reel finger (reel tine) made from UV-stabilised polymer. Aftermarket replacement for OEM AH166489 / 410856A1. Suits: John Deere 600 Series and 900 Series grain headers, plus compatible Case IH grain platforms using the 6-inch reel tine. Please confirm fitment. Part no: DCP-AH166489 Price is per finger, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98518
100
units
available
Discount Combine Parts
Ex Farm Price
$14 / each
Excl. GST
Heavy-duty forged steel finger guard (knife guard) to replace OEM MD118344. Suits: MacDon FD70, FD75, FD140 draper fronts and compatible MacDon platforms. Please confirm serial-specific fitment. Part no: DCP-MD-118344 Price is per guard, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98516
100
units
available
Discount Combine Parts
Ex Farm Price
$12 / each
Excl. GST
Heavy-duty aftermarket poly skid (wear plate / skid shoe) to replace OEM 87532221 (also cross-references 129297). Made from abrasion-resistant material, it protects the underside of the cutterbar from ground contact, rocks and debris and saves wear on your header. Fits: Case IH draper platforms 2062, 2142, 2152, 2162; MacDon D50, D60, D65, FD70, FD75; New Holland 82C, 83C, 84C, 86C. Please confirm serial-specific fitment. Size: approx. 160.5 x 150.4 x 44.9 mm. Weight approx. 0.21 kg. Part no: DCP-87532221 Price is per skid, excluding GST (on sale, normally $13.00). Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

HEADERS & HARVESTERS IN NORTH ST MARYS NSW

Harvest time demands dependable machinery that performs under pressure. This is the place to buy a harvester that suits your crop or sell a harvester ready for its next farm. Explore listings for new harvesters and used harvesters, including farm harvesters from leading brands. Check specs, hours, and headers to make sure you’re ready for a smooth and efficient harvest season.

General Questions

Can I buy a used harvester or header on LocalAg?

Yes. Used harvesters, headers and the fronts that go with them are listed in the Machinery & Supplies category. You can browse current listings, filter by location and contact the seller directly to ask about hours, condition and service history. Every sale is backed by LocalAg's secure escrow payment system, so your money is protected until the deal is done, which matters on a machine of this value.

What brands of harvesters are listed for sale on LocalAg?

Listings come from farmers and sellers across Australia, so you will find a mix of the major harvester brands across a range of models and ages. Use the search and filters to narrow down to the brand, class size and front type you are after.

Harvesters and headers for sale near me, how do I find one?

Use the radius filter to show machines listed within 50km, 250km, 500km or 1000km of you, or browse the marketplace by map. With harvesters, many buyers look further afield for the right machine and arrange transport, and because secure escrow protects your payment until delivery, buying interstate is straightforward.

Can I sell my harvester or header on LocalAg for free?

Yes. Listing is free, so you can list your harvester, fronts or other gear, along with anything else across the marketplace, and pay nothing until it sells. A small transaction fee applies on a successful sale, split between the buyer and the seller. Full details are on the Fees & Charges page.

Can I buy harvester fronts and headers separately, including draper, stripper and comb fronts?

Yes. Harvester fronts are listed both with machines and on their own, including draper fronts, stripper fronts and comb fronts, along with the trailers to cart them. Search by type and location and confirm the fit with your harvester before you buy, since fronts are matched to specific makes and models.

How does payment work for a high-value harvester purchase on LocalAg?

The same secure system covers a harvester as any other sale. Rather than paying the seller directly, your funds are held in secure escrow and are only released once both sides confirm the transaction is complete, so your money is protected until the machine is yours. For a purchase of this size, LocalAg Plus can also help manage the contract, payment and logistics, which is well worth using on a complex, high-value deal.

Is CheckVault safe to use for a $200,000+ machinery purchase?

Yes. CheckVault is LocalAg's secure escrow partner and an established Australian payment service built for exactly this kind of high-value transaction. Your money is not handed to the seller. It is held in escrow with an independent custodian, Perpetual Corporate Trust, one of Australia's long-standing trustee companies, and is only released once you and the seller both agree the deal is done. CheckVault holds an Australian Financial Services Licence and verifies users' identities to reduce fraud, and if a dispute arises the funds stay held until it is resolved. For a six-figure harvester, that independent protection is exactly what takes the risk out of paying someone you may not have dealt with before.

How do I transport a harvester I buy on LocalAg?

Harvesters are large, often oversize loads, so most buyers arrange specialist transport with an experienced ag machinery carrier. You can organise your own freight, or for a purchase like this LocalAg Plus can help manage logistics and transport as part of the deal. Because your payment is held in secure escrow until the machine is delivered and confirmed, you can buy interstate with confidence, which matters when the best harvester for your program is in another state. National reach is one of the platform's strengths.

What should I inspect before buying a second-hand harvester?

Before you buy, it pays to check:


  1. Engine and separator or rotor hours, along with full service history
  2. The threshing and separation system, including the rotor or drum, concaves and sieves, since this is the heart of the machine and the single most important area to get right
  3. Wear points such as the feeder house, augers, elevators and chains
  4. The front and any included attachments, and that everything matches the listing


For a machine at this value, an independent pre-purchase inspection by a specialist is well worth it. Because you deal directly with the seller on LocalAg, it is easy to request records, photos and an inspection before you commit.

How many hours or hectares should a good used harvester have done?

Harvesters are usually judged on engine hours and separator or rotor hours, and sometimes on hectares or acres harvested. As a rough guide, under about 2,000 to 3,000 separator hours is considered moderate for a modern machine, while much higher counts point to heavier use. Hours and area matter less than how the machine has been maintained and stored, so always weigh them against service history and condition.

Why buy a harvester on LocalAg instead of Facebook Marketplace or Gumtree?

LocalAg is built by farmers, for farmers, and made specifically for agricultural trading. On a high-value machine that matters: you get verified users, secure escrow payments that protect six-figure sums until the deal is done, and an ag-only audience of genuine growers and sellers rather than anonymous classifieds. You deal directly with the seller, so you can ask the detailed questions a purchase like this deserves.

Is LocalAg run by farmers?

Yes. LocalAg is a family-owned, Australian business backed by Feed Central, with a team that brings together more than 100 years of combined experience in agriculture. It is built by farmers, for farmers, which is why the platform is designed around how farmers actually buy and sell rather than as a generic classifieds site.

An error has occurred. Reload 🗙