371 results

#99170
Ex Farm Price
$1
/ each
Excl. GST
Suits John Deere cotton picker moisture columns. Aftermarket moisture pad replacing OEM N275607 — a consumable you go through by the carton every season, priced accordingly.
Type: Spindle moistener pad — polyurethane
Wets and cleans the spindles as they rotate past the moisture column so seed cotton releases cleanly at the doffer. Glazed, hardened or missing pads let gum and plant sugars build on the barbs, which drops picking efficiency and puts extra load on the doffer. Change pads as a full column set, not individually.
Replaces OEM: N275607
Suits: John Deere cotton pickers 7660, 7760, 9976, 9986, 9996, CP690 and CP770. Please confirm fitment.
Part no: DCP-N275607
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#99169
Ex Farm Price
$6
/ each
Excl. GST
Suits John Deere cotton picker heads. Aftermarket right-hand spindle assembly replacing OEM AN274216 — the highest-volume wear part on any picker head, stocked in depth at direct factory pricing.
Type: Right-hand barbed spindle assembly
The spindle is the barbed rotating shaft that reaches into the open boll and twists the seed cotton free. A picker head runs hundreds of them, and worn or bent spindles show up immediately as lower picking efficiency, higher trash content in the module and accelerated doffer wear. Replace in sets across a drum so barb condition stays even.
Replaces OEM: AN274216
Suits: John Deere cotton pickers 7660, 7760, 9976, 9986, 9996 and CP690. Please confirm fitment.
Part no: DCP-AN274216
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#99168
Ex Farm Price
$10
/ each
Excl. GST
Suits John Deere PRO-16 cotton pickers including the CP690 and CP770. Aftermarket high-speed poly doffer replacing OEM AN406038 — the high-speed profile built for the round module heads.
Type: High-speed polyurethane doffer
Mounted above the spindle drum, the doffer strips seed cotton off the rotating spindles and throws it into the air duct. A worn doffer leaves cotton on the spindles, which costs you yield at the module and shows up as wrapped, gummy spindles. Replace as a stack so doffing height stays consistent.
Replaces OEM: AN406038
Suits: John Deere cotton pickers 7660, 7760, 9976, 9986, 9996, CP690 and CP770. Please confirm fitment.
Part no: DCP-AN406038
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#99167
Ex Farm Price
$7
/ each
Excl. GST
Suits John Deere cotton picker heads. Aftermarket rear grid bar replacing OEM N277543 — direct factory pricing on a part that takes a beating every season.
Type: Rear grid bar — picker head
Grid bars form the throat the plant is drawn through, holding the stalk in position so the spindles can reach into the bolls. Bent or worn bars change that spacing, which means missed cotton and more stalk damage. Front and rear bars wear at different rates — check both when you are in there.
Replaces OEM: N277543
Suits: John Deere cotton pickers 7660, 7760, 9976, 9986, 9996, CP690 and CP770. Please confirm fitment.
Part no: DCP-N277543
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#99166
Ex Farm Price
$7
/ each
Excl. GST
Suits John Deere cotton picker heads. Aftermarket front grid bar replacing OEM N277542 — the front bar takes the first hit, so most growers run through these faster than the rears.
Type: Front grid bar — picker head
Grid bars form the throat the plant is drawn through, holding the stalk in position so the spindles can reach into the bolls. The front bar meets the plant first and wears hardest. Worn bars widen the throat, which lets stalks move around and costs you picking efficiency.
Replaces OEM: N277542
Suits: John Deere cotton pickers 7660, 7760, 9976, 9986, 9996, CP690 and CP770. Please confirm fitment.
Part no: DCP-N277542
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#99165
Ex Farm Price
$412
/ each
Excl. GST
Case IH straw chopper pulley for dependable header performance
Type: Straw chopper drive pulley — machined steel pulley
Transfers drive power to the straw chopper system, maintaining correct belt tension and supporting reliable residue handling
Replaces OEM: 1315264C1
Suits: Case IH 1640, 1644, 1660, 1666, 1680, 1688; 2144, 2166, 2188; 2344, 2366, 2377, 2388; 2577, 2588. Please confirm fitment.
Part no: DCP-1315264C1
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#99164
Ex Farm Price
$30
/ each
Excl. GST
Case IH Straw Chopper Knife Kit for Reliable Harvest Performance
Type: Straw chopper knife kit — includes two knives and mounting hardware for use with 28- or 56-blade rotor configurations
Provides full replacement of the chopper knives, restoring optimal chopping performance, promoting consistent residue distribution and reducing wear on the rotor system
Replaces OEM: 87280980
Suits: Case IH 7010, 7120, 7230, 8010, 8120, 8230, 9120, 9230 (confirm serial-specific fitment).
Part no: DCP-87280980
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#99163
Ex Farm Price
$154
/ each
Excl. GST
Straw Chopper Blade Kit for John Deere Performance and Reliability
Type: Straw chopper rotor blade fitting kit (includes left-hand and right-hand blades)
Provides the rotor blades required in the straw-chopper system to evenly distribute chopped straw and chaff across the field, improving residue cover and reducing material build-up behind the combine.
Replaces OEM: AH225937
Suits: JD S-Series and STS combines equipped with the factory straw-chopper rotor system — confirm serial-specific fitment.
Part no: DCP-AH225937
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#99162
Ex Farm Price
$6
/ each
Excl. GST
Suits John Deere cotton picker moisture systems. Aftermarket distributor plate replacing OEM N276746 — a cheap part that quietly costs you picking efficiency when it is worn or cracked.
Type: Moisture system distributor plate
Spreads moisture solution evenly across the column so every pad in the stack gets its share. A cracked or blocked plate starves the pads at one end of the column, so some spindles stay dry and start gumming up while the rest look fine — an uneven wear pattern that is easy to misdiagnose.
Replaces OEM: N276746
Suits: John Deere cotton pickers 7660, 7760, 9976, 9986, 9996, CP690 and CP770. Please confirm fitment.
Part no: DCP-N276746
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#99161
Ex Farm Price
$129
/ each
Excl. GST
Heavy-duty aftermarket flat pulley designed to replace OEM AH221938 in JD combine straw-chopper drive systems. Manufactured to precise diameter and profile to ensure correct belt tracking and minimal wear under high-capacity harvesting conditions.
Type: Flat pulley / idler pulley – straw-chopper drive system
Guides and supports the belt driving the straw-chopper assembly, ensuring consistent rotation and tension for clean straw spreading and minimal downtime.
Replaces OEM: AH221938
Suits: JD combines equipped with straw-chopper systems including 9670 STS, 9770 STS, 9870 STS and relevant S-Series, X9-Series machines — confirm serial-specific fitment.
Part no: DCP-AH221938
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#99160
Ex Farm Price
$30
/ each
Excl. GST
Aftermarket blade kit designed for the straw chopper on CIH combines. Built to replace the OEM blade set and provide reliable residue management during harvest. Installed in the chopper housing, this kit helps maintain even crop residue distribution and prevents buildup or blockages in the chopper system.
Type: Straw chopper blade kit — twin beveled-edge forged blades, includes hardware
Cuts and distributes straw and crop residue through the combine discharge system, supporting cleaner field returns and efficient chopping operations
Replaces OEM: 442832A1
Suits: CIH combines including 1420, 1440, 1460, 1470, 1480, 1482, 1620, 1640, 1644, 1660, 1666, 1670, 1680, 1682, 1688, 2144, 2166, 2188, 2344, 2366, 2377, 2388, 2577, 2588 (confirm serial-specific fitment).
Part no: DCP-442832A1
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#99159
Ex Farm Price
$200
/ each
Excl. GST
High-quality aftermarket straw chopper rotor blade kit designed to replace OEM AH225940 on JD combines. Manufactured from high-tensile steel for long service life, precision edge retention and efficient straw distribution behind the machine.
Type: Straw chopper rotor blade kit (includes 8 scoop-style blades)
Provides the set of rotor blades required in the straw chopper system to chop and evenly disperse residue behind the combine, supporting optimal field finish and reducing material build-up.
Replaces OEM: AH225940
Suits: JD combines including 9560 STS, 9570 STS, 9650 STS, 9660 STS, 9670 STS, 9750 STS, 9860 STS — confirm serial-specific fitment.
Part no: DCP-AH225940
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.



