371 results

#98919
Ex Farm Price
$2
/ each
Excl. GST
Aftermarket finger guide plate designed for JD grain headers. This plate supports and guides the disappearing auger fingers as they extend and retract, ensuring smooth crop feeding into the header. Built as a durable replacement for the OEM plate, it restores proper finger movement, reduces wear on the auger system, and improves feeding consistency in varying crop conditions.
Type: Finger guide plate — formed steel plate with precision-machined slots
Guides the disappearing auger fingers through their extension and retraction cycle, ensuring smooth operation and consistent crop flow
Replaces OEM: H87192
Suits: JD 900 Series, JD 600 Series, and other JD grain heads using disappearing finger systems (confirm serial-specific fitment). Please confirm fitment.
Part no: DCP-H87192
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98918
Ex Farm Price
$5
/ each
Excl. GST
Aftermarket retractable auger finger holder built as a direct replacement for OEM AH171602. It locates the retractable auger finger in the auger tube and absorbs the wear as the finger cycles in and out.
Replaces OEM: AH171602
Part no: DCP-AH171602
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98916
Ex Farm Price
$4,065
/ each
Excl. GST
Heavy-duty aftermarket draper wobble box designed to replace OEM DE21086 on JD draper headers. Engineered with precision-machined gears and reinforced housing to deliver smooth knife-drive motion and withstand high cutting loads in demanding harvest conditions.
Type: Draper wobble box – knife drive gearbox
Converts rotational drive from the header input shaft into the oscillating motion that powers the cutterbar. Ensures consistent knife movement, reduced vibration and reliable cutting performance across wide draper platforms.
Replaces OEM: DE21086
Suits: JD draper headers including 625D, 630D, 630FD, 635D, 635FD, 640D, 640FD, 645FD — confirm serial-specific fitment.. Please confirm fitment.
Part no: DCP-DE21086
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98915
Ex Farm Price
$14
/ each
Excl. GST
Aftermarket retractable auger finger designed for John Deere grain platforms. Built as a direct replacement for the OEM finger that extends and retracts inside the header auger, this component helps pull crop material evenly toward the feederhouse. Installed along the auger tube, it improves feeding consistency, reduces bunching, and supports smooth header performance in varying crop conditions.
Type: Retractable auger finger — durable polymer/nylon finger with metal core
Extends and retracts within the auger to guide crop material toward the feederhouse, improving feeding efficiency and reducing header vibration
Replaces OEM: H102724
Suits: John Deere 200 Series, 900 Series, and select early 600 Series grain headers using the H102724 finger design (confirm serial-specific fitment). Please confirm fitment.
Part no: DCP-AH214869
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98914
Ex Farm Price
$4,278
/ each
Excl. GST
Suits John Deere 600 Series grain platform fronts. Aftermarket wobble box replacing OEM DE19785 — precision-machined knife drive gearbox for smooth, reliable cutting performance.
Type: Wobble box knife drive assembly — precision-machined gearbox
Converts rotary drive input into the reciprocating motion required to drive the cutterbar knife. A worn wobble box causes knife vibration, uneven cutting and increased knife section wear. Replace at first sign of noise or excessive knife float.
Replaces OEM: DE19785
Suits: John Deere 600 Series platform fronts including 620F, 625F, 630F, 635F, 640F, 645F. Please confirm fitment.
Part no: DCP-DE19785
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98913
Ex Farm Price
$2,593
/ each
Excl. GST
Aftermarket wobble box assembly designed for the knife drive on CIH header platforms. Built to replace the OEM unit and provide smooth, reliable power transfer to the knife assembly in demanding harvesting conditions. Installed in the header drive system, it converts rotary motion into the reciprocating movement required for consistent cutting performance.
Type: Wobble box knife-drive assembly — oil-bath style forged gearbox
Converts rotary drive motion into reciprocating knife movement, helping maintain clean cutting while reducing vibration and stress on the header drive
Replaces OEM: 87502685 (also referenced as 133157A3, 133157A2)
Suits: CIH 1010 and 1020 series headers (confirm serial-specific fitment). Please confirm fitment.
Part no: DCP-87502685
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98909
Ex Farm Price
$778
/ each
Excl. GST
Aftermarket complete knife assembly engineered for the left-hand 35-ft header configuration on CIH platforms. Built to replace the OEM assembly and provide smooth, reliable reciprocating knife action across the full width of the cutterbar under heavy harvest loads.
Type: Complete knife assembly — formed steel with heat-treated cutting components
Drives full-width reciprocating knife movement, ensuring consistent cutting, reduced vibration and efficient crop flow in demanding conditions
Replaces OEM: 84170823
Suits: CIH 3050 left-hand 35-ft headers (confirm serial-specific fitment). Please confirm fitment.
Part no: DCP-84170823
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98908
Ex Farm Price
$571
/ each
Excl. GST
Aftermarket complete knife assembly engineered for the left-hand 30-ft header configuration on CIH platforms. Built to replace the OEM assembly and provide smooth, reliable reciprocating knife action across the full cutterbar width in high-capacity harvesting scenarios.
Type: Complete knife assembly — formed steel with heat-treated cutting components
Drives full-width reciprocating knife movement on left-hand headers, ensuring consistent cutting performance, reduced vibration and efficient crop flow under load
Replaces OEM: 84170820
Suits: CIH 3050 left-hand 30-ft headers (confirm serial-specific fitment). Please confirm fitment.
Part no: DCP-87489671
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98907
Ex Farm Price
$240
/ each
Excl. GST
Aftermarket right-hand knife head designed for MacDon draper fronts. Built as a heavy-duty replacement for the OEM knife drive head, this component transfers oscillating motion from the knife drive box to the cutterbar knife assembly. Installed on the right-hand side of the header, it ensures smooth knife movement, reduces vibration, and supports clean cutting performance across the full draper width.
Type: Knife head — right-hand oscillating drive head, precision-machined steel
Converts drive motion into oscillation for the cutterbar knife, maintaining smooth cutting action and reducing wear on the drive system
Replaces OEM: 132897 (Right-Hand)
Suits: MacDon FD70, FD75, FD1, and equivalent draper fronts using the RH knife head 132897 (confirm serial-specific fitment). Please confirm fitment.
Part no: DCP-132897
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98906
Ex Farm Price
$240
/ each
Excl. GST
Aftermarket left-hand knife head designed for MacDon draper fronts. Built as a heavy-duty replacement for the OEM knife drive head, this component transfers oscillating motion from the drive system to the cutterbar knife assembly. Installed on the left-hand side of the header, it ensures smooth knife operation, reduces vibration, and supports clean cutting performance across the entire draper width.
Type: Knife head — left-hand oscillating drive head, precision-machined steel
Converts drive motion into oscillation for the cutterbar knife, maintaining clean cutting action while reducing stress on the knife drive system
Replaces OEM: 132896 (Left-Hand)
Suits: MacDon FD70, FD75, FD1, and equivalent draper fronts using the LH knife head 132896 (confirm serial-specific fitment). Please confirm fitment.
Part no: DCP-132896
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98905
Ex Farm Price
$9
/ each
Excl. GST
Aftermarket retractable auger finger designed for Case IH and New Holland grain headers. Built as a direct replacement for the OEM finger that extends and retracts inside the auger to pull crop material toward the feederhouse, this component restores consistent feeding and reduces plugging in heavy crop conditions. Installed in the header auger tube, it delivers smooth crop flow and maintains reliable header performance.
Type: Retractable auger finger — hardened plastic/nylon finger with steel mounting core
Extends and retracts in the auger to guide crop material evenly toward the feederhouse, improving feeding and reducing header vibration
Replaces OEM: 84980892 (also referenced as 87310494, 86633669 depending on variant)
Suits: Case IH: 1020, 2020, 3020, 3162, 2144, 2166, 2188, 2344, 2366, 2388 and others. Please confirm fitment.
Part no: DCP-87670642
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98904
Ex Farm Price
$6
/ each
Excl. GST
Aftermarket Teflon wear sleeve designed to replace the OEM bushing on JD 600-series corn headers. Built to fit into the head-plait assembly where the drive shaft runs, this sleeve reduces friction and supports smooth rotation in abrasive harvesting conditions.
Type: Wear sleeve (Teflon) — inside diameter 50 mm, outside diameter 60 mm, width 20 mm
Provides a low-friction surface for the drive shaft in the head plait assembly, helping to prevent wear and ensure consistent operation
Replaces OEM: H157812
Suits: JD 600-series corn headers (confirm serial-specific fitment). Please confirm fitment.
Part no: DCP-H157812
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.




