371 results

#98980
Ex Farm Price
$1,037
/ each
Excl. GST
Aftermarket feeder house floor designed for JD combines. This heavy-gauge floor panel forms the base of the feederhouse, supporting smooth crop flow from the header into the feed accelerator. Built as a direct replacement for the OEM floor, it restores structural integrity, reduces crop hang-up, and protects the feederhouse from wear caused by abrasive crop material.
Type: Feederhouse floor — heavy-gauge formed and reinforced steel panel
Provides a durable feederhouse base to support clean, even crop movement toward the feed accelerator and reduces wear on surrounding components
Replaces OEM: AXE29353
Suits: JD S550, S650, S660, S670, S680, S690; and select STS models using AXE29353 floor design (confirm serial-specific fitment). Please confirm fitment.
Part no: DCP-AXE29353
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98979
Ex Farm Price
$410
/ each
Excl. GST
Aftermarket threshing element designed for the 2nd position on John Deere combine rotors. Built to replace the OEM high-wear element used early in the threshing section, this component restores aggressive crop engagement and improves early-stage material breakup. Installed in the second rotor position, it helps maintain consistent threshing performance, supports smooth crop flow, and reduces rotor losses in demanding harvest conditions.
Type: Threshing element — hardened steel, high-wear design for early rotor position
Performs initial crop agitation and separation inside the rotor, improving threshing efficiency and supporting higher throughput
Replaces OEM: AH216675
Suits: John Deere 9650STS, 9660STS, 9670STS, 9750STS, 9760STS, 9860STS, 9870STS; John Deere S650, S660, S670, S680, S690, S760, S770, S780, S790 (confirm serial-specific fitment). Please confirm fitment.
Part no: DCP-AH216675
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98978
Ex Farm Price
$359
/ each
Excl. GST
Heavy-duty aftermarket chaffer swinger arm assembly designed to replace OEM AH220398 on John Deere combines. Built with high-strength steel and precision machining to withstand the frequent motion and load of the chaffer system for efficient grain separation.
Type: Chaffer swinger arm assembly
Connects and drives the chaffer (upper sieve) swing mechanism, helping maintain correct motion of the sieve for effective grain cleaning and separation during harvesting.
Replaces OEM: AH220398
Suits: JD 9470 STS, 9570 STS, 9670 STS, 9770 STS, 9870 STS; JD S-Series S430, S440, S550, S560, S650, S660, S670, S680, S690; JD T-Series T5-400/500/600/700, T550, T560, T6-500/600/700/800, T660, T670; JD W-Series W540, W550, W650, W660; JD X9-1000, X9-1100 — confirm serial-specific fitment.. Please confirm fitment.
Part no: DCP-AH220398
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98977
Ex Farm Price
$642
/ each
Excl. GST
Heavy-duty aftermarket rotor drive coupling designed to replace OEM 84222993 on CIH combines. Engineered to transmit high torque loads in the rotor drive system, built for durability and precision in flagship harvesting machines.
Type: Rotor drive coupling – splined coupling
Connects the rotor drive system by transferring power via spline and bolt interface, maintaining alignment and smooth operation under heavy harvest conditions.
Replaces OEM: 84222993
Suits: CIH flagship combines including 7010, 7120, 7230, 7240, 7250, 8010, 8120, 8230, 8240, 8250, 9010, 9120, 9230, 9240, 9250 — confirm serial-specific fitment.. Please confirm fitment.
Part no: DCP-84222993
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98976
Ex Farm Price
$1,854
/ each
Excl. GST
Case IH feederhouse sprocket tube for dependable combine performance
Type: Feederhouse sprocket tube — heavy-gauge steel with welded drive hub
Supports and drives the feederhouse conveyor chain system by maintaining correct sprocket alignment and transferring rotational force
Replaces OEM: 84414915
Suits: Case IH 6130, 6140, 6150, 7120, 7130, 7230, 7240, 7250, 8010, 8120, 8230, 8240, 8250, 9120, 9230, 9240, 9250. Please confirm fitment.
Part no: DCP-84414915
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98975
Ex Farm Price
$3
/ each
Excl. GST
Aftermarket heavy duty flexible reel tine built as a direct replacement for OEM 87561020. It sweeps standing crop back onto the draper belt; the flexible nylon body springs back instead of snapping when it hits a stone or a lodged head.
Replaces OEM: 87561020
Part no: DCP-87561020
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98974
Ex Farm Price
$138
/ each
Excl. GST
Heavy-duty aftermarket cleaning fan hub/pulley assembly designed to replace OEM 1541552C2 on CIH combines. Built from wear-resistant steel and precision machined to handle rotational forces and maintain alignment in the cleaning fan drive system.
Type: Cleaning fan hub / pulley assembly – fan drive system
Serves as the hub and pulley component of the cleaning‐fan drive assembly. Transfers rotational power to the cleaning fan, maintains belt or drive alignment, and ensures steady airflow through the cleaning shoe area for efficient grain separation.
Replaces OEM: 1541552C2
Suits: CIH combines including 1660, 2344, 2366, 2377, 2388, 2577, 2588 — confirm serial‐specific fitment.. Please confirm fitment.
Part no: DCP-1541552C2
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98973
Ex Farm Price
$1,415
/ each
Excl. GST
Heavy-duty aftermarket top chaffer designed to replace OEM AH212239 on JD combines. Constructed from galvanized steel and precision-formed louvre wire to optimize air flow and separation performance in high-capacity cleaning systems.
Type: Top chaffer – cleaning/separation system (short-finger configuration)
Sits above the bottom sieve to direct grain and chaff flow in the cleaning system. The short-finger design and closely spaced wires improve cleaning efficiency by maintaining airflow while rejecting light material, contributing to cleaner grain and reduced returns.
Replaces OEM: AH212239
Suits: JD 9650 STS, 9660 STS, 9670 STS, 9750 STS, 9760 STS, 9770 STS, 9860 STS, 9870 STS — confirm serial-specific fitment.. Please confirm fitment.
Part no: DCP-AH212239
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98972
Ex Farm Price
$138
/ each
Excl. GST
Heavy-duty aftermarket cleaning fan pulley designed to replace OEM 1541553C2 on CIH combines. Built from high-strength cast or machined steel to maintain correct belt alignment, smooth rotation and long service life in the combine’s fan drive system.
Type: Cleaning fan pulley – fan drive system
Transfers drive to the cleaning fan belt or sheave system, maintaining airflow through the cleaning shoe area, supporting efficient grain separation and reducing drive-system wear.
Replaces OEM: 1541553C2
Suits: CIH combines including 1640, 1644, 1666, 1680, 1688, 2144, 2166, 2188, 2344, 2366, 2377, 2388, 2577, 2588 — confirm serial-specific fitment.. Please confirm fitment.
Part no: DCP-1541553C2
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98971
Ex Farm Price
$3,536
/ each
Excl. GST
Upgrade your harvesting performance with premium Kampaq concaves designed to improve threshing efficiency, grain separation, and overall combine productivity. Engineered for demanding field conditions, Kampaq concaves deliver consistent crop flow, reduced grain loss, and cleaner samples across a wide range of harvesting applications.
Part no: KJD,9770STS,S780
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98970
Ex Farm Price
$176
/ each
Excl. GST
Aftermarket splined coupler designed for the unloading and drive systems on Case IH combines. Built to replace the OEM coupler that connects shafts within the unload or transition drive assemblies, this component ensures stable torque transfer and reduces vibration under heavy harvest loads. Installed at key drive connection points, the coupler maintains alignment and supports smooth power delivery.
Type: Splined coupler — hardened steel, internal spline drive
Connects splined drive shafts to transfer rotational power while maintaining proper alignment and reducing wear in the unload or drive system
Replaces OEM: 87586665 (also referenced as 87345692)
Suits: Case IH 5088, 6088, 7088, 7120, 7230, 7240, 7250, 8010, 8120, 8230, 8240, 8250, 9230, 9240, 9250 (confirm serial-specific fitment). Please confirm fitment.
Part no: DCP-87586665
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98969
Ex Farm Price
$448
/ each
Excl. GST
Heavy-duty aftermarket clean grain elevator chain designed to replace OEM AXE72667 on JD combines. Manufactured from heat-treated steel with bolted rubber paddles and built for high-capacity elevator systems in large-frame harvesters.
Type: Clean grain elevator chain – conveyor chain with paddles
Transports cleaned grain upward from the cleaning zone to the grain tank via paddle-equipped chain links, ensuring smooth flow, minimal spillage and high throughput in the combine elevator system.
Replaces OEM: AXE72667
Suits: JD S670, S680, S770, S780, S790 and other high-capacity JD combines using this chain — confirm serial-specific fitment.. Please confirm fitment.
Part no: DCP-AXE72667
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.




