Agricultural Marketplace in Werombi NSW | LocalAg
Welcome to LocalAg

New and existing customers

chat with kev
Within 50km
Within 50kmWithin 250kmWithin 500kmWithin 1000km

371 Results

Marketplace in Werombi NSW

Featured
FeaturedPrice (Low to high)Price (High to low)Date (Newest)Date (Oldest)Protein (Low to high)Protein (High to low)Metabolizable Energy (Low to high)Metabolizable Energy (High to low)$/kg C.P. (Low to high)$/kg C.P. (High to low)¢/MJ M.E. (Low to high)¢/MJ M.E. (High to low)
All Listings
All ListingsFor SaleWanted
Featured
FeaturedPrice (Low to high)Price (High to low)Date (Newest)Date (Oldest)Protein (Low to high)Protein (High to low)Metabolizable Energy (Low to high)Metabolizable Energy (High to low)$/kg C.P. (Low to high)$/kg C.P. (High to low)¢/MJ M.E. (Low to high)¢/MJ M.E. (High to low)

Filter

Location:

Show all

Werombi NSW

Categories:

Filter & Refine:

Reset all

State:

Advanced Search:

Reset all

Advertisements

371 results

Item Image
#99019
100
units
available
Discount Combine Parts
Ex Farm Price
$1,709 / each
Excl. GST
Aftermarket pre-cleaner chaffer sieve designed for John Deere combines. Built as a direct replacement for the OEM upper pre-cleaning sieve, this component restores proper airflow and early separation of chaff and grain before material reaches the main chaffer. Installed at the front of the cleaning shoe, it improves overall cleaning capacity, reduces load on downstream sieves, and enhances grain quality in high-yield crop conditions. Type: Pre-cleaner chaffer sieve — adjustable louver design, heavy-duty formed steel Performs initial grain and chaff separation by regulating airflow and material flow at the front of the cleaning system, improving cleaning efficiency Replaces OEM: AH212423 Suits: John Deere 9650STS, 9660STS, 9670STS, 9750STS, 9760STS, 9860STS; select S-Series models using the same pre-cleaner configuration (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-AH212423 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#99018
100
units
available
Discount Combine Parts
Ex Farm Price
$820 / each
Excl. GST
Suits Case IH Axial-Flow combines. Aftermarket transmission input shaft replacing OEM 184217C1 — precision-machined shaft for reliable power transfer in the combine driveline. Type: Transmission input shaft — precision-machined alloy steel Transfers drive power from the engine or hydrostatic system into the combine's main transmission. Worn or broken shafts cause loss of drive, abnormal noise and combine shutdown. Replace at first sign of vibration or drive slip. Replaces OEM: 184217C1 Suits: Case IH 1460, 1480, 1620, 1640, 1660, 1680, 1688; 2144, 2166, 2188; 2344, 2366, 2388 — confirm serial-specific fitment. Please confirm fitment. Part no: DCP-184217C1 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#99017
100
units
available
Discount Combine Parts
Ex Farm Price
$1,474 / each
Excl. GST
Aftermarket left-hand side sieve frame designed for John Deere combines. Built as a heavy-duty replacement for the OEM cleaning shoe frame component, this LH sieve frame restores structural rigidity and correct mounting support for the chaffer and sieve system. Installed on the left-hand side of the cleaning shoe, it maintains accurate sieve alignment, reduces vibration, and ensures consistent grain cleaning performance in high-capacity harvesting conditions. Type: LH side sieve frame — formed and reinforced steel frame assembly Supports the left-hand side of the sieve and chaffer system, maintaining proper alignment and oscillation for effective grain cleaning Replaces OEM: AH230512 Suits: John Deere S550, S650, S660, S670, S680, S690; and compatible 60/70-Series STS combines using the AH230512 sieve frame (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-AH230512 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#99016
100
units
available
Discount Combine Parts
Ex Farm Price
$1,037 / each
Excl. GST
Aftermarket vertical unloading auger designed for John Deere combines. Built as a durable replacement for the OEM vertical auger inside the unloading system, this component restores smooth grain movement from the grain tank to the horizontal auger for efficient unloading. Installed in the vertical unload tube, it maintains proper grain flow, reduces wear, and ensures reliable performance during high-capacity harvesting and fast unload cycles. Type: Vertical unloading auger — heavy-duty flighted steel auger Moves grain vertically from the grain tank to the unloading cross auger, ensuring smooth, consistent unloading performance Replaces OEM: AH164070 Suits: John Deere 60- and 70-Series STS combines, including 9560STS, 9660STS, 9760STS, 9860STS; and compatible early S-Series models using the AH164070 auger (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-AH164070 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#99015
100
units
available
Discount Combine Parts
Ex Farm Price
$583 / each
Excl. GST
Heavy-duty aftermarket chaffer tail board designed to replace OEM AXE10197 on JD combines. Built from durable steel sheet with precision mounting preparation to restore structural integrity in the chaffer cleaning system and optimise grain cleaning performance in large-body harvesters. Type: Chaffer tail board – cleaning/separation system Located at the tail end of the chaffer section, the tail board supports and guides the cleaned grain and chaff flow, ensuring proper distribution and helping maintain consistent separation performance during heavy harvest loads. Replaces OEM: AXE10197 Suits: JD 9570 STS, 9650 STS, 9750 STS, 9760 STS, 9660 STS, 9670 STS, 9870 STS — confirm serial-specific fitment.. Please confirm fitment. Part no: DCP-AXE10197 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#99014
100
units
available
Discount Combine Parts
Ex Farm Price
$47 / each
Excl. GST
Aftermarket left-hand inner shaker cam designed for John Deere combines. Built to replace the OEM cam used in the cleaning shoe drive system, this component restores proper oscillation of the sieves and maintains consistent grain separation performance. Installed on the shaker drive shaft in the left-hand inner position, it helps ensure smooth shoe motion, reduce vibration, and extend component life during heavy harvest conditions. Type: Shaker cam — precision-machined steel, left-hand inner position Converts rotational drive into oscillating motion for the cleaning shoe and sieve assembly, improving material agitation and cleaning efficiency Replaces OEM: H234550 Suits: John Deere 9560STS, 9650STS, 9660STS, 9750STS, 9760STS, 9860STS; John Deere S650, S660, S670, S680, S690. Please confirm fitment. Part no: DCP-H234550 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#99013
100
units
available
Discount Combine Parts
Ex Farm Price
$91 / each
Excl. GST
Aftermarket right-hand inner shaker cam designed for John Deere combines. Built to replace the OEM cam inside the cleaning shoe drive system, this component restores correct oscillating motion of the sieves and helps maintain efficient grain separation during high-demand harvest conditions. Installed on the shaker drive shaft, it controls the movement of the shoe assembly and reduces vibration and wear. Type: Shaker cam — precision-machined steel, right-hand inner position Converts rotational drive into controlled oscillating motion for the sieve and cleaning shoe system, ensuring consistent grain cleaning and reduced component stress Replaces OEM: H234549 Suits: John Deere 9560STS, 9650STS, 9660STS, 9750STS, 9760STS, 9860STS; John Deere S650, S660, S670, S680, S690. Please confirm fitment. Part no: DCP-H234549 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#99012
100
units
available
Discount Combine Parts
Ex Farm Price
$92 / each
Excl. GST
Aftermarket loading auger drive assembly designed for John Deere combines. Built as a durable replacement for the OEM drive mechanism that powers the grain tank loading auger, this component restores smooth, reliable transfer of grain into the tank. Installed on the loading auger drive system, it maintains proper belt alignment, reduces vibration, and ensures consistent auger performance during high-capacity harvesting. Type: Loading auger drive — heavy-duty steel drive hub/pulley assembly Transfers rotational drive power to the loading auger, ensuring smooth grain movement from the clean grain elevator into the grain tank Replaces OEM: H136186 Suits: John Deere 9400, 9500, 9600; and compatible 10/50/60-Series combines using the H136186 loading auger drive (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-H136186 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#99011
100
units
available
Discount Combine Parts
Ex Farm Price
$1,037 / each
Excl. GST
Aftermarket lower elevator housing designed for John Deere combines. Built as a heavy-duty replacement for the OEM housing used in the clean grain or return elevator system, this component provides structural support and proper alignment for the elevator chain, sprockets, and drive components. Installed at the lower section of the elevator assembly, it maintains smooth grain flow, reduces wear, and ensures reliable elevator operation in demanding harvest conditions. Type: Lower elevator housing — formed and reinforced steel assembly Supports and aligns the lower portion of the clean grain or return elevator system, maintaining correct chain tracking and consistent material flow Replaces OEM: AH222240 Suits: John Deere S550, S650, S660, S670, S680, S690; and select 60/70-Series STS models using the AH222240 housing (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-AXE17210 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#99010
100
units
available
Discount Combine Parts
Ex Farm Price
$2,593 / each
Excl. GST
Heavy‐duty aftermarket 15‐tooth feederhouse sprocket designed to replace OEM 48101428 on CIH combine harvesters. Reinforced steel construction allows for efficient chain drive power transmission under heavy load and field conditions. Type: Drive sprocket – feed‐house chain drive Engages with the feeder‐house chain links to transfer rotational power, ensuring smooth crop feed into the machine’s elevation system and reliable field performance. Replaces OEM: 48101428 Suits: CIH 250 Series combines including 7250, 8250, 9250 (non-clutched feeder system) — confirm serial-specific fitment.. Please confirm fitment. Part no: DCP-90433959 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#99009
100
units
available
Discount Combine Parts
Ex Farm Price
$17 / each
Excl. GST
Aftermarket feed accelerator wear plate designed for JD combines. This plate protects the feed accelerator housing from abrasion caused by high-velocity crop flow, reducing wear and extending component life. Installed inside the feed accelerator area, it restores proper shielding, maintains smooth material movement, and helps prevent housing damage during heavy harvest conditions. Type: Feed accelerator wear plate — formed, abrasion-resistant steel Shields the feed accelerator housing from crop-induced wear, improving durability and maintaining smooth crop flow Replaces OEM: H165407 (also commonly referenced as H165407B) Suits: JD S-Series, JD 60-Series, JD 70-Series, JD 90-Series combines (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-H165407 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#99008
100
units
available
Discount Combine Parts
Ex Farm Price
$1,297 / each
Excl. GST
Aftermarket feederhouse chain assembly built to replace the OEM unit on CIH combines with 60" feederhouse platforms. Constructed for heavy-use harvesting workloads, this chain ensures reliable crop flow, minimal downtime, and improved service life in abrasive, debris-rich conditions. Type: Feederhouse chain assembly — smooth slats, heavy-duty forged link construction Transfers conveyor motion in the feederhouse, driving the crop into the header evenly while resisting stretch, slat breakage and wear-related failures Replaces OEM: 136439A1 Suits: CIH 2144, 2166, 2344 and 2366 series combines with 60" feederhouse (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-136439A1 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
An error has occurred. Reload 🗙