Harvesters for Sale in Werombi NSW | LocalAg Marketplace
Welcome to LocalAg

New and existing customers

chat with kev
Within 50km
Within 50kmWithin 250kmWithin 500kmWithin 1000km

333 Results

Headers & Harvesters in Werombi NSW

Featured
FeaturedPrice (Low to high)Price (High to low)Date (Newest)Date (Oldest)Year (Newest)Year (Oldest)Hours (Low to high)Hours (High to low)
All Listings
All ListingsFor SaleWanted
Featured
FeaturedPrice (Low to high)Price (High to low)Date (Newest)Date (Oldest)Year (Newest)Year (Oldest)Hours (Low to high)Hours (High to low)

Filter

Location:

Show all

Werombi NSW

Categories:

Show all
category svg

Machinery & Supplies

Sub Categories:

Reset

Headers & Harvesters

Filter & Refine:

Reset all

Sub-type:

Brand / Make:

Condition:

State:

Advanced Search:

Reset all

Advertisements

333 results

Item Image
#98915
100
units
available
Discount Combine Parts
Ex Farm Price
$14 / each
Excl. GST
Aftermarket retractable auger finger designed for John Deere grain platforms. Built as a direct replacement for the OEM finger that extends and retracts inside the header auger, this component helps pull crop material evenly toward the feederhouse. Installed along the auger tube, it improves feeding consistency, reduces bunching, and supports smooth header performance in varying crop conditions. Type: Retractable auger finger — durable polymer/nylon finger with metal core Extends and retracts within the auger to guide crop material toward the feederhouse, improving feeding efficiency and reducing header vibration Replaces OEM: H102724 Suits: John Deere 200 Series, 900 Series, and select early 600 Series grain headers using the H102724 finger design (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-AH214869 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98914
100
units
available
Discount Combine Parts
Ex Farm Price
$4,278 / each
Excl. GST
Suits John Deere 600 Series grain platform fronts. Aftermarket wobble box replacing OEM DE19785 — precision-machined knife drive gearbox for smooth, reliable cutting performance. Type: Wobble box knife drive assembly — precision-machined gearbox Converts rotary drive input into the reciprocating motion required to drive the cutterbar knife. A worn wobble box causes knife vibration, uneven cutting and increased knife section wear. Replace at first sign of noise or excessive knife float. Replaces OEM: DE19785 Suits: John Deere 600 Series platform fronts including 620F, 625F, 630F, 635F, 640F, 645F. Please confirm fitment. Part no: DCP-DE19785 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98913
100
units
available
Discount Combine Parts
Ex Farm Price
$2,593 / each
Excl. GST
Aftermarket wobble box assembly designed for the knife drive on CIH header platforms. Built to replace the OEM unit and provide smooth, reliable power transfer to the knife assembly in demanding harvesting conditions. Installed in the header drive system, it converts rotary motion into the reciprocating movement required for consistent cutting performance. Type: Wobble box knife-drive assembly — oil-bath style forged gearbox Converts rotary drive motion into reciprocating knife movement, helping maintain clean cutting while reducing vibration and stress on the header drive Replaces OEM: 87502685 (also referenced as 133157A3, 133157A2) Suits: CIH 1010 and 1020 series headers (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-87502685 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98909
100
units
available
Discount Combine Parts
Ex Farm Price
$778 / each
Excl. GST
Aftermarket complete knife assembly engineered for the left-hand 35-ft header configuration on CIH platforms. Built to replace the OEM assembly and provide smooth, reliable reciprocating knife action across the full width of the cutterbar under heavy harvest loads. Type: Complete knife assembly — formed steel with heat-treated cutting components Drives full-width reciprocating knife movement, ensuring consistent cutting, reduced vibration and efficient crop flow in demanding conditions Replaces OEM: 84170823 Suits: CIH 3050 left-hand 35-ft headers (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-84170823 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98908
100
units
available
Discount Combine Parts
Ex Farm Price
$571 / each
Excl. GST
Aftermarket complete knife assembly engineered for the left-hand 30-ft header configuration on CIH platforms. Built to replace the OEM assembly and provide smooth, reliable reciprocating knife action across the full cutterbar width in high-capacity harvesting scenarios. Type: Complete knife assembly — formed steel with heat-treated cutting components Drives full-width reciprocating knife movement on left-hand headers, ensuring consistent cutting performance, reduced vibration and efficient crop flow under load Replaces OEM: 84170820 Suits: CIH 3050 left-hand 30-ft headers (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-87489671 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98907
100
units
available
Discount Combine Parts
Ex Farm Price
$240 / each
Excl. GST
Aftermarket right-hand knife head designed for MacDon draper fronts. Built as a heavy-duty replacement for the OEM knife drive head, this component transfers oscillating motion from the knife drive box to the cutterbar knife assembly. Installed on the right-hand side of the header, it ensures smooth knife movement, reduces vibration, and supports clean cutting performance across the full draper width. Type: Knife head — right-hand oscillating drive head, precision-machined steel Converts drive motion into oscillation for the cutterbar knife, maintaining smooth cutting action and reducing wear on the drive system Replaces OEM: 132897 (Right-Hand) Suits: MacDon FD70, FD75, FD1, and equivalent draper fronts using the RH knife head 132897 (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-132897 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98906
100
units
available
Discount Combine Parts
Ex Farm Price
$240 / each
Excl. GST
Aftermarket left-hand knife head designed for MacDon draper fronts. Built as a heavy-duty replacement for the OEM knife drive head, this component transfers oscillating motion from the drive system to the cutterbar knife assembly. Installed on the left-hand side of the header, it ensures smooth knife operation, reduces vibration, and supports clean cutting performance across the entire draper width. Type: Knife head — left-hand oscillating drive head, precision-machined steel Converts drive motion into oscillation for the cutterbar knife, maintaining clean cutting action while reducing stress on the knife drive system Replaces OEM: 132896 (Left-Hand) Suits: MacDon FD70, FD75, FD1, and equivalent draper fronts using the LH knife head 132896 (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-132896 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98905
100
units
available
Discount Combine Parts
Ex Farm Price
$9 / each
Excl. GST
Aftermarket retractable auger finger designed for Case IH and New Holland grain headers. Built as a direct replacement for the OEM finger that extends and retracts inside the auger to pull crop material toward the feederhouse, this component restores consistent feeding and reduces plugging in heavy crop conditions. Installed in the header auger tube, it delivers smooth crop flow and maintains reliable header performance. Type: Retractable auger finger — hardened plastic/nylon finger with steel mounting core Extends and retracts in the auger to guide crop material evenly toward the feederhouse, improving feeding and reducing header vibration Replaces OEM: 84980892 (also referenced as 87310494, 86633669 depending on variant) Suits: Case IH: 1020, 2020, 3020, 3162, 2144, 2166, 2188, 2344, 2366, 2388 and others. Please confirm fitment. Part no: DCP-87670642 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98904
100
units
available
Discount Combine Parts
Ex Farm Price
$6 / each
Excl. GST
Aftermarket Teflon wear sleeve designed to replace the OEM bushing on JD 600-series corn headers. Built to fit into the head-plait assembly where the drive shaft runs, this sleeve reduces friction and supports smooth rotation in abrasive harvesting conditions. Type: Wear sleeve (Teflon) — inside diameter 50 mm, outside diameter 60 mm, width 20 mm Provides a low-friction surface for the drive shaft in the head plait assembly, helping to prevent wear and ensure consistent operation Replaces OEM: H157812 Suits: JD 600-series corn headers (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-H157812 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98903
100
units
available
Discount Combine Parts
Ex Farm Price
$7 / each
Excl. GST
Aftermarket retractable auger finger designed for Case IH grain headers. Built as a reliable replacement for the OEM finger that extends and retracts inside the auger tube, this component helps pull crop material smoothly toward the feederhouse. Installed across the auger assembly, it improves feeding consistency, reduces bunching, and enhances overall header performance in heavy crop conditions. Type: Retractable auger finger — heavy-duty polymer/nylon finger with metal core Extends and retracts within the auger to guide crop material evenly into the feederhouse, improving feeding and reducing vibration Replaces OEM: 1320699C1 (also referenced as 1320699C2 depending on variant) Suits: Case IH 1020, 2020, 3020, 2162, 2144, 2166, 2188 and similar auger-fed grain headers (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-1320699C1 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98902
100
units
available
Discount Combine Parts
Ex Farm Price
$11 / each
Excl. GST
Aftermarket auger finger designed for platform header auger assemblies on CIH combines. Built to replace the OEM component and provide consistent material feed from the cutter bar into the feeder house. Installed in the auger trough area, this component helps prevent blockages and supports smooth crop flow in heavy harvesting conditions. Type: Auger finger — steel tubular finger (Ø 16 mm, length 259 mm) Guides and moves crop material from the cutterbar to the feeder house, maintaining a smooth and continuous flow and reducing risk of debris-induced blockages Replaces OEM: 84194057 Suits: CIH 3020, 3050, 3152, 3162 headers (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-84194057 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98901
100
units
available
Discount Combine Parts
Ex Farm Price
$210 / each
Excl. GST
Aftermarket double ribbed side belt designed for MacDon draper fronts. Built as a high-durability replacement for the OEM side draper belt, this component provides strong traction, stable crop conveyance, and long wear life in demanding harvest conditions. Installed on the side belt conveyor system, it moves cut crop material smoothly toward the centre draper, ensuring consistent feeding into the feederhouse. Type: Side draper belt — double ribbed, heavy-duty reinforced rubber belt Transfers crop material from the cutterbar area to the centre belt, maintaining smooth side-to-centre feeding and preventing bunching or slippage Replaces OEM: 1003942 (MFSB) Suits: MacDon FD70, FD75, FD1, and equivalent draper fronts using the 1003942 side belt (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-MFSB Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

HEADERS & HARVESTERS IN WEROMBI NSW

Harvest time demands dependable machinery that performs under pressure. This is the place to buy a harvester that suits your crop or sell a harvester ready for its next farm. Explore listings for new harvesters and used harvesters, including farm harvesters from leading brands. Check specs, hours, and headers to make sure you’re ready for a smooth and efficient harvest season.

General Questions

Can I buy a used harvester or header on LocalAg?

Yes. Used harvesters, headers and the fronts that go with them are listed in the Machinery & Supplies category. You can browse current listings, filter by location and contact the seller directly to ask about hours, condition and service history. Every sale is backed by LocalAg's secure escrow payment system, so your money is protected until the deal is done, which matters on a machine of this value.

What brands of harvesters are listed for sale on LocalAg?

Listings come from farmers and sellers across Australia, so you will find a mix of the major harvester brands across a range of models and ages. Use the search and filters to narrow down to the brand, class size and front type you are after.

Harvesters and headers for sale near me, how do I find one?

Use the radius filter to show machines listed within 50km, 250km, 500km or 1000km of you, or browse the marketplace by map. With harvesters, many buyers look further afield for the right machine and arrange transport, and because secure escrow protects your payment until delivery, buying interstate is straightforward.

Can I sell my harvester or header on LocalAg for free?

Yes. Listing is free, so you can list your harvester, fronts or other gear, along with anything else across the marketplace, and pay nothing until it sells. A small transaction fee applies on a successful sale, split between the buyer and the seller. Full details are on the Fees & Charges page.

Can I buy harvester fronts and headers separately, including draper, stripper and comb fronts?

Yes. Harvester fronts are listed both with machines and on their own, including draper fronts, stripper fronts and comb fronts, along with the trailers to cart them. Search by type and location and confirm the fit with your harvester before you buy, since fronts are matched to specific makes and models.

How does payment work for a high-value harvester purchase on LocalAg?

The same secure system covers a harvester as any other sale. Rather than paying the seller directly, your funds are held in secure escrow and are only released once both sides confirm the transaction is complete, so your money is protected until the machine is yours. For a purchase of this size, LocalAg Plus can also help manage the contract, payment and logistics, which is well worth using on a complex, high-value deal.

Is CheckVault safe to use for a $200,000+ machinery purchase?

Yes. CheckVault is LocalAg's secure escrow partner and an established Australian payment service built for exactly this kind of high-value transaction. Your money is not handed to the seller. It is held in escrow with an independent custodian, Perpetual Corporate Trust, one of Australia's long-standing trustee companies, and is only released once you and the seller both agree the deal is done. CheckVault holds an Australian Financial Services Licence and verifies users' identities to reduce fraud, and if a dispute arises the funds stay held until it is resolved. For a six-figure harvester, that independent protection is exactly what takes the risk out of paying someone you may not have dealt with before.

How do I transport a harvester I buy on LocalAg?

Harvesters are large, often oversize loads, so most buyers arrange specialist transport with an experienced ag machinery carrier. You can organise your own freight, or for a purchase like this LocalAg Plus can help manage logistics and transport as part of the deal. Because your payment is held in secure escrow until the machine is delivered and confirmed, you can buy interstate with confidence, which matters when the best harvester for your program is in another state. National reach is one of the platform's strengths.

What should I inspect before buying a second-hand harvester?

Before you buy, it pays to check:


  1. Engine and separator or rotor hours, along with full service history
  2. The threshing and separation system, including the rotor or drum, concaves and sieves, since this is the heart of the machine and the single most important area to get right
  3. Wear points such as the feeder house, augers, elevators and chains
  4. The front and any included attachments, and that everything matches the listing


For a machine at this value, an independent pre-purchase inspection by a specialist is well worth it. Because you deal directly with the seller on LocalAg, it is easy to request records, photos and an inspection before you commit.

How many hours or hectares should a good used harvester have done?

Harvesters are usually judged on engine hours and separator or rotor hours, and sometimes on hectares or acres harvested. As a rough guide, under about 2,000 to 3,000 separator hours is considered moderate for a modern machine, while much higher counts point to heavier use. Hours and area matter less than how the machine has been maintained and stored, so always weigh them against service history and condition.

Why buy a harvester on LocalAg instead of Facebook Marketplace or Gumtree?

LocalAg is built by farmers, for farmers, and made specifically for agricultural trading. On a high-value machine that matters: you get verified users, secure escrow payments that protect six-figure sums until the deal is done, and an ag-only audience of genuine growers and sellers rather than anonymous classifieds. You deal directly with the seller, so you can ask the detailed questions a purchase like this deserves.

Is LocalAg run by farmers?

Yes. LocalAg is a family-owned, Australian business backed by Feed Central, with a team that brings together more than 100 years of combined experience in agriculture. It is built by farmers, for farmers, which is why the platform is designed around how farmers actually buy and sell rather than as a generic classifieds site.

An error has occurred. Reload 🗙