Harvesters for Sale in Werombi NSW | LocalAg Marketplace
Welcome to LocalAg

New and existing customers

chat with kev
Within 50km
Within 50kmWithin 250kmWithin 500kmWithin 1000km

333 Results

Headers & Harvesters in Werombi NSW

Featured
FeaturedPrice (Low to high)Price (High to low)Date (Newest)Date (Oldest)Year (Newest)Year (Oldest)Hours (Low to high)Hours (High to low)
All Listings
All ListingsFor SaleWanted
Featured
FeaturedPrice (Low to high)Price (High to low)Date (Newest)Date (Oldest)Year (Newest)Year (Oldest)Hours (Low to high)Hours (High to low)

Filter

Location:

Show all

Werombi NSW

Categories:

Show all
category svg

Machinery & Supplies

Sub Categories:

Reset

Headers & Harvesters

Filter & Refine:

Reset all

Sub-type:

Brand / Make:

Condition:

State:

Advanced Search:

Reset all

Advertisements

333 results

Item Image
#98928
100
units
available
Discount Combine Parts
Ex Farm Price
$256 / each
Excl. GST
Aftermarket knife head built for the cutterbar section of CIH combine headers. Designed to replace the OEM unit and provide reliable performance in high-capacity harvesting. Installed in the header’s cutting system, this component secures the knife sections and transmits reciprocating motion to maintain consistent cutting across the full width of the platform. Type: Knife head — forged steel component Holds knife sections in place and transfers cutting motion to the sickle bar, helping to maintain clean cutting and reduce uneven wear Replaces OEM: 1316161C95 (also referenced as 1307297C91, 1307297C92, 1316161C91, 1316161C92, 1316161C93, 1316161C94, 87422431) Suits: CIH 1010, 1020, 2010 and 2020 series headers (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-1316161C95 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98927
100
units
available
Discount Combine Parts
Ex Farm Price
$3,566 / each
Excl. GST
Aftermarket front wobble box designed for John Deere grain platforms. Built as a heavy-duty replacement for the OEM knife drive gearbox, this wobble box delivers smooth oscillating motion to the cutterbar for clean, consistent cutting performance. Installed on the left-hand side of the header, it restores proper knife drive function, reduces vibration, and supports reliable feeding into the auger or draper belts during demanding harvest conditions. Type: Wobble box / knife drive gearbox — precision-machined drive housing with oscillating output Converts rotational power into oscillating motion to drive the cutterbar knife, ensuring smooth cutting action across the width of the header Replaces OEM: DQ17541 Suits: John Deere 900 Series and select early 600 Series grain platforms using the DQ17541 wobble box (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-DQ17541 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98926
100
units
available
Discount Combine Parts
Ex Farm Price
$14 / each
Excl. GST
Aftermarket double sickle guard designed for the cutterbar section of CIH combine headers. Built to replace the OEM guard and provide dependable protection in demanding harvest conditions. Installed in the knife assembly area, this guard shields the cutting edges from debris, abrasive crop flow and impact damage, helping maintain consistent cutting performance. Type: Double prong knife guard — forged steel protective component Protects the cutterbar and sickle sections from crop-induced wear and foreign object impacts Replaces OEM: 1307299C2 (also referenced as 1307299C1, 334305A1, 87442324) Suits: CIH 1010, 1020, 2010 and 2020 series headers (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-1307299C2 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98925
100
units
available
Discount Combine Parts
Ex Farm Price
$214 / each
Excl. GST
Aftermarket centre-feed splined drive shaft engineered for JD 600- and 700-series draper platforms. Built from heat-treated carbon steel to replace the OEM shaft and deliver reliable power transfer to the centre-feed roller under demanding harvest conditions. Installed in the centre-feed drive system, it maintains smooth crop flow and dependable knife-drive engagement. Type: Splined drive shaft — 1045 carbon steel, precision machined Transfers drive power to the centre-feed roller, ensuring consistent feeding and stable header performance Replaces OEM: H233910 Suits: JD 600 Series draper platforms including 625D, 630D, 635D, 640D, 630FD, 635FD, 640FD, and JD 700 Series draper platforms including 725D, 730D, 735D, 740D (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-H233910 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98924
100
units
available
Discount Combine Parts
Ex Farm Price
$648 / each
Excl. GST
Aftermarket knife assembly designed for the 30-foot left-hand header configuration on CIH combines. Built to replace the OEM assembly and deliver smooth, reliable cutting performance in high-capacity harvesting situations. Installed along the cutterbar, this complete assembly ensures accurate knife movement, reduced vibration and efficient crop flow. Type: Complete knife assembly — formed steel and heat-treated components Provides full knife movement on left-hand header, delivering clean cutting and reliable operation across the full width of the platform Replaces OEM: 84170820 Suits: CIH 3050 30-ft headers (left-hand configuration) — confirm serial-specific fitment. Please confirm fitment. Part no: DCP-84170820 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98923
100
units
available
Discount Combine Parts
Ex Farm Price
$642 / each
Excl. GST
Aftermarket knife assembly engineered for the right-hand 35-ft header configuration on CIH platforms. Designed to replace the OEM assembly and provide smooth, reliable reciprocating knife action for full-width cutting under demanding harvest conditions. Type: Complete knife assembly — heavy-duty forged steel and heat-treated cutter components Drives full-width knife movement on right-hand headers, ensuring consistent cutting, reduced vibration and efficient crop flow Replaces OEM: 87493457 Suits: CIH 3050 35-ft RH headers (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-87493457 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98922
100
units
available
Discount Combine Parts
Ex Farm Price
$8 / each
Excl. GST
Applies downward pressure on the knife (sickle) to keep it running tight against the guards Part no: DCP-86630786 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98921
100
units
available
Discount Combine Parts
Ex Farm Price
$1,712 / each
Excl. GST
Aftermarket draper roller shaft designed for John Deere draper fronts. Built as a heavy-duty replacement for the OEM shaft used in the draper roller assembly, this component restores proper roller rotation and smooth belt tracking. Installed within the draper roller tube, it supports even crop conveyance, reduces vibration, and maintains consistent feeding performance during high-volume harvesting. Type: Draper roller shaft — precision-machined, hardened steel Supports and drives the draper roller, ensuring smooth belt rotation and reliable crop movement toward the feederhouse Replaces OEM: AXE58661 Suits: John Deere 700D, 730D, 735D, 740D, HD draper fronts and equivalent platforms using the AXE58661 roller shaft (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-AXE58661 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98920
100
units
available
Discount Combine Parts
Ex Farm Price
$36 / each
Excl. GST
Aftermarket splice kit engineered for JD 600 series draper and rigid platforms. Built to replace the OEM kit and provide an efficient repair option for sectional knife assemblies in the cutterbar. Designed to help reduce downtime during harvest by enabling quick restoration of the cutterbar sections. Type: Kit — includes hardware for sectional knife assembly repair Facilitates repair of sectional knife assemblies by replacing bolts, nuts, splice components and reinforcing connection points in the cutterbar system Replaces OEM: AH205918 Suits: JD 600 Series platforms including 600F, 600R, 635FD, 640FD, 645FD (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-AH205918 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98919
100
units
available
Discount Combine Parts
Ex Farm Price
$2 / each
Excl. GST
Aftermarket finger guide plate designed for JD grain headers. This plate supports and guides the disappearing auger fingers as they extend and retract, ensuring smooth crop feeding into the header. Built as a durable replacement for the OEM plate, it restores proper finger movement, reduces wear on the auger system, and improves feeding consistency in varying crop conditions. Type: Finger guide plate — formed steel plate with precision-machined slots Guides the disappearing auger fingers through their extension and retraction cycle, ensuring smooth operation and consistent crop flow Replaces OEM: H87192 Suits: JD 900 Series, JD 600 Series, and other JD grain heads using disappearing finger systems (confirm serial-specific fitment). Please confirm fitment. Part no: DCP-H87192 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98918
100
units
available
Discount Combine Parts
Ex Farm Price
$5 / each
Excl. GST
Aftermarket retractable auger finger holder built as a direct replacement for OEM AH171602. It locates the retractable auger finger in the auger tube and absorbs the wear as the finger cycles in and out. Replaces OEM: AH171602 Part no: DCP-AH171602 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#98916
100
units
available
Discount Combine Parts
Ex Farm Price
$4,065 / each
Excl. GST
Heavy-duty aftermarket draper wobble box designed to replace OEM DE21086 on JD draper headers. Engineered with precision-machined gears and reinforced housing to deliver smooth knife-drive motion and withstand high cutting loads in demanding harvest conditions. Type: Draper wobble box – knife drive gearbox Converts rotational drive from the header input shaft into the oscillating motion that powers the cutterbar. Ensures consistent knife movement, reduced vibration and reliable cutting performance across wide draper platforms. Replaces OEM: DE21086 Suits: JD draper headers including 625D, 630D, 630FD, 635D, 635FD, 640D, 640FD, 645FD — confirm serial-specific fitment.. Please confirm fitment. Part no: DCP-DE21086 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

HEADERS & HARVESTERS IN WEROMBI NSW

Harvest time demands dependable machinery that performs under pressure. This is the place to buy a harvester that suits your crop or sell a harvester ready for its next farm. Explore listings for new harvesters and used harvesters, including farm harvesters from leading brands. Check specs, hours, and headers to make sure you’re ready for a smooth and efficient harvest season.

General Questions

Can I buy a used harvester or header on LocalAg?

Yes. Used harvesters, headers and the fronts that go with them are listed in the Machinery & Supplies category. You can browse current listings, filter by location and contact the seller directly to ask about hours, condition and service history. Every sale is backed by LocalAg's secure escrow payment system, so your money is protected until the deal is done, which matters on a machine of this value.

What brands of harvesters are listed for sale on LocalAg?

Listings come from farmers and sellers across Australia, so you will find a mix of the major harvester brands across a range of models and ages. Use the search and filters to narrow down to the brand, class size and front type you are after.

Harvesters and headers for sale near me, how do I find one?

Use the radius filter to show machines listed within 50km, 250km, 500km or 1000km of you, or browse the marketplace by map. With harvesters, many buyers look further afield for the right machine and arrange transport, and because secure escrow protects your payment until delivery, buying interstate is straightforward.

Can I sell my harvester or header on LocalAg for free?

Yes. Listing is free, so you can list your harvester, fronts or other gear, along with anything else across the marketplace, and pay nothing until it sells. A small transaction fee applies on a successful sale, split between the buyer and the seller. Full details are on the Fees & Charges page.

Can I buy harvester fronts and headers separately, including draper, stripper and comb fronts?

Yes. Harvester fronts are listed both with machines and on their own, including draper fronts, stripper fronts and comb fronts, along with the trailers to cart them. Search by type and location and confirm the fit with your harvester before you buy, since fronts are matched to specific makes and models.

How does payment work for a high-value harvester purchase on LocalAg?

The same secure system covers a harvester as any other sale. Rather than paying the seller directly, your funds are held in secure escrow and are only released once both sides confirm the transaction is complete, so your money is protected until the machine is yours. For a purchase of this size, LocalAg Plus can also help manage the contract, payment and logistics, which is well worth using on a complex, high-value deal.

Is CheckVault safe to use for a $200,000+ machinery purchase?

Yes. CheckVault is LocalAg's secure escrow partner and an established Australian payment service built for exactly this kind of high-value transaction. Your money is not handed to the seller. It is held in escrow with an independent custodian, Perpetual Corporate Trust, one of Australia's long-standing trustee companies, and is only released once you and the seller both agree the deal is done. CheckVault holds an Australian Financial Services Licence and verifies users' identities to reduce fraud, and if a dispute arises the funds stay held until it is resolved. For a six-figure harvester, that independent protection is exactly what takes the risk out of paying someone you may not have dealt with before.

How do I transport a harvester I buy on LocalAg?

Harvesters are large, often oversize loads, so most buyers arrange specialist transport with an experienced ag machinery carrier. You can organise your own freight, or for a purchase like this LocalAg Plus can help manage logistics and transport as part of the deal. Because your payment is held in secure escrow until the machine is delivered and confirmed, you can buy interstate with confidence, which matters when the best harvester for your program is in another state. National reach is one of the platform's strengths.

What should I inspect before buying a second-hand harvester?

Before you buy, it pays to check:


  1. Engine and separator or rotor hours, along with full service history
  2. The threshing and separation system, including the rotor or drum, concaves and sieves, since this is the heart of the machine and the single most important area to get right
  3. Wear points such as the feeder house, augers, elevators and chains
  4. The front and any included attachments, and that everything matches the listing


For a machine at this value, an independent pre-purchase inspection by a specialist is well worth it. Because you deal directly with the seller on LocalAg, it is easy to request records, photos and an inspection before you commit.

How many hours or hectares should a good used harvester have done?

Harvesters are usually judged on engine hours and separator or rotor hours, and sometimes on hectares or acres harvested. As a rough guide, under about 2,000 to 3,000 separator hours is considered moderate for a modern machine, while much higher counts point to heavier use. Hours and area matter less than how the machine has been maintained and stored, so always weigh them against service history and condition.

Why buy a harvester on LocalAg instead of Facebook Marketplace or Gumtree?

LocalAg is built by farmers, for farmers, and made specifically for agricultural trading. On a high-value machine that matters: you get verified users, secure escrow payments that protect six-figure sums until the deal is done, and an ag-only audience of genuine growers and sellers rather than anonymous classifieds. You deal directly with the seller, so you can ask the detailed questions a purchase like this deserves.

Is LocalAg run by farmers?

Yes. LocalAg is a family-owned, Australian business backed by Feed Central, with a team that brings together more than 100 years of combined experience in agriculture. It is built by farmers, for farmers, which is why the platform is designed around how farmers actually buy and sell rather than as a generic classifieds site.

An error has occurred. Reload 🗙