Harvesters for Sale in Werombi NSW | LocalAg Marketplace
Welcome to LocalAg

New and existing customers

chat with kev
Within 50km
Within 50kmWithin 250kmWithin 500kmWithin 1000km

333 Results

Headers & Harvesters in Werombi NSW

Featured
FeaturedPrice (Low to high)Price (High to low)Date (Newest)Date (Oldest)Year (Newest)Year (Oldest)Hours (Low to high)Hours (High to low)
All Listings
All ListingsFor SaleWanted
Featured
FeaturedPrice (Low to high)Price (High to low)Date (Newest)Date (Oldest)Year (Newest)Year (Oldest)Hours (Low to high)Hours (High to low)

Filter

Location:

Show all

Werombi NSW

Categories:

Show all
category svg

Machinery & Supplies

Sub Categories:

Reset

Headers & Harvesters

Filter & Refine:

Reset all

Sub-type:

Brand / Make:

Condition:

State:

Advanced Search:

Reset all

Advertisements

333 results

Item Image
#99085
100
units
available
Discount Combine Parts
Ex Farm Price
$1,102 / each
Excl. GST
Heavy-duty aftermarket gear set designed to replace OEM 1315597C1 on CIH combines. Built from hardened alloy steel to provide reliable power transfer in feeder-house and fan-drive systems under demanding harvest loads. Type: Gear set – feeder/fan drive Restores correct gear mesh and load transfer between the feeder-house and fan-drive components, ensuring smooth operation, reduced wear, and consistent performance in the combine’s drive system. Replaces OEM: 1315597C1 Suits: CIH 1440, 1460, 1470, 1480, 1640, 1644, 1660, 1666, 1670, 1680, 1688, 2144, 2166, 2188, 2344, 2366, 2377, 2388, 2577, 2588, 5088, 5130, 5140, 5150, 6130, 6140, 6150, 7088, 7130, 7140, 7150 — confirm serial-specific fitment. Part no: DCP-1315597C1 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#99084
100
units
available
Discount Combine Parts
Ex Farm Price
$648 / each
Excl. GST
Aftermarket feeder house floor designed for JD combines. This floor panel forms the main lower surface of the feederhouse, supporting smooth and even crop flow from the header into the feed accelerator. Built as a heavy-duty replacement for the OEM floor, it restores structural strength, reduces crop buildup, and protects the feederhouse from wear caused by abrasive material during harvest. Type: Feederhouse floor — heavy-gauge formed and reinforced steel panel Provides a durable base for the feederhouse, improving crop movement and reducing wear on conveyor components Replaces OEM: AH173868 Suits: JD 9550, 9560, 9650STS, 9660STS, 9750STS, 9760STS, 9860STS; compatible with some early S-Series configurations (confirm serial-specific fitment). Part no: DCP-AH173868 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#99083
100
units
available
Discount Combine Parts
Ex Farm Price
$129 / each
Excl. GST
Heavy-duty aftermarket idler pulley designed to replace OEM AH97031 on JD combines. Precision-machined to maintain correct belt alignment and tension in multiple drive systems within the combine. Type: Idler pulley – flat belt drive Supports belt drives by guiding or tensioning the belt, ensuring smooth rotation and proper tracking for feeder-house, tailings, or conveyor systems in combines. Replaces OEM: AH97031 Suits: JD combines including 9400 series, 9500 series, 9550, 9600, 9650, 9660, 9670 STS; S-Series S550, S650, S660; standard applications where belt drives are used — confirm serial-specific fitment. Part no: DCP-AH97031 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#99081
100
units
available
Discount Combine Parts
Ex Farm Price
$72 / each
Excl. GST
Aftermarket shaker arm shaft designed for Case IH combines. Built as a heavy-duty replacement for the OEM shaft used in the cleaning shoe drive system, this component supports the shaker arms and enables proper oscillating movement of the sieves. Installed across the shaker drive assembly, it maintains alignment, reduces vibration, and helps ensure consistent grain cleaning performance under demanding harvest conditions. Type: Shaker arm shaft — hardened steel, precision-machined Supports and connects shaker arms to deliver oscillating motion to the cleaning shoe and sieve assembly, improving material agitation and separation efficiency Replaces OEM: 1979251C1 (also referenced as 1348114C1) Suits: Case IH 2144, 2166, 2188; 2344, 2366, 2377, 2388; 2577, 2588. Please confirm fitment. Part no: DCP-1979251C1 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#99080
100
units
available
Discount Combine Parts
Ex Farm Price
$499 / each
Excl. GST
Heavy-duty aftermarket auxiliary pump drive hub designed to replace OEM 87545084 on Case IH combines. Built to deliver reliable spline-engagement, high-load capacity and long service life in the hydrostatic pump or auxiliary belt drive system of modern combines. Type: Auxiliary pump / belt drive hub – hydrostatic pump drive system Connects the hydrostatic pump or auxiliary belt drive within the combine’s drive train, maintaining correct spline engagement, transfer of torque, and system alignment for consistent harvest performance. Replaces OEM: 87545084 Suits: Case IH combines 5088, 6088, 7088 — confirm serial-specific fitment. Part no: DCP-87545084 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#99079
100
units
available
Discount Combine Parts
Ex Farm Price
$324 / each
Excl. GST
Heavy-duty aftermarket feed beater drive arm designed to replace OEM AH164925 on John Deere S-Series combines. Built to deliver reliable motion transfer and long-life performance in the beater drive system under demanding harvest conditions. Type: Beater drive arm – feed beater linkage Connects and drives the feed beater mechanism, transmitting rotation from the drive source to the beater assembly, ensuring efficient crop material feed and consistent throughput. Replaces OEM: AH164925 Suits: John Deere S‐Series combines including S660, S670, S680, S690 and others with the feed-beater drive arm assembly — confirm serial-specific fitment. Part no: DCP-AH164925 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#99078
100
units
available
Discount Combine Parts
Ex Farm Price
$285 / each
Excl. GST
Aftermarket feeder house idler arm designed for JD combines. This arm supports the idler pulley within the feederhouse belt system, maintaining correct belt tension and alignment during header and feeding operations. Built as a durable replacement for the OEM arm, it restores smooth belt tracking, reduces slippage, and helps ensure consistent crop flow into the combine. Type: Feederhouse idler arm — heavy-gauge formed steel arm with reinforced pivot mount Maintains correct belt tension and alignment in the feeder drive system to ensure reliable power transfer and smooth feeding Replaces OEM: AH168397 Suits: JD 9650STS, 9660STS, 9750STS, 9760STS, 9860STS; and selected JD S-Series models using this feeder drive configuration (confirm serial-specific fitment). Part no: DCP-AH168397 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#99077
100
units
available
Discount Combine Parts
Ex Farm Price
$186 / each
Excl. GST
Aftermarket slip clutch drive hub designed for Case IH combines. Built to replace the OEM hub in the feeder or header drive system, this component transfers power through the slip clutch assembly while protecting the driveline from overload. Installed between the clutch plates and drive shaft, it helps maintain smooth engagement, reduces shock loads, and prevents driveline failure during tough harvest conditions. Type: Slip clutch drive hub — precision-machined steel, splined center Connects the driveline to the slip clutch to regulate torque transfer and protect the system from sudden overload or binding Replaces OEM: 1303136C2 (also referenced as 1303136C1) Suits: Case IH 1420, 1440, 1460, 1480, 1482; 1620, 1640, 1660, 1680, 1688; 2144, 2166, 2188; 2344, 2366, 2377, 2388; 2577, 2588 (confirm serial-specific fitment). Part no: DCP-1303136C2 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#99076
100
units
available
Discount Combine Parts
Ex Farm Price
$259 / each
Excl. GST
Heavy-duty aftermarket drive arm designed to replace OEM AH163830 on JD combines. Built from reinforced steel and precision machined to handle the cyclic loads in the shoe and conveyor auger drive system, ensuring reliable crop flow and reduced downtime in high-capacity harvesting. Type: Shoe & conveyor auger drive arm Transfers power from the drive system to the conveyor auger in the shoe section of the combine, supporting smooth crop material movement and maintaining alignment in the feeder system. Replaces OEM: AH163830 Suits: JD S650, S660, S670, S680, S690, 9650 STS, 9660 STS — confirm serial-specific fitment. Part no: DCP-AH163830 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#99075
100
units
available
Discount Combine Parts
Ex Farm Price
$998 / each
Excl. GST
Aftermarket pinion shaft designed for New Holland and Case IH combines. Built as a durable replacement for the OEM shaft used in the gearbox or drive housing, this component restores proper torque transfer and smooth mechanical engagement within the driven gear set. Installed inside the drive assembly, it maintains correct alignment, reduces vibration, and supports reliable operation under demanding harvest conditions. Type: Pinion shaft — precision-machined, hardened steel shaft with splined or keyed ends Transfers rotational power within the drive or gearbox assembly, ensuring smooth gear engagement and consistent drive performance Replaces OEM: 84069419 Suits: New Holland CR and CX Series combines; Case IH crossover models using the 84069419 pinion shaft (confirm serial-specific fitment). Part no: DCP-84069419 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#99074
100
units
available
Discount Combine Parts
Ex Farm Price
$441 / each
Excl. GST
Clean Grain Elevator Chain for John Deere STS Series Combines Type: Clean grain elevator chain — conveyor chain with bolted paddles, regular capacity Moves cleaned grain from the cleaning shoe up the elevator into the grain tank. The chain and paddles maintain steady grain transport with minimal spillage and efficient throughput during harvest. Replaces OEM: AXE25091 Suits: John Deere S540, S550, S650, S660, S760, S770 and compatible STS Series combines. Please confirm fitment. Part no: DCP-AXE25091 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.
Item Image
#99073
100
units
available
Discount Combine Parts
Ex Farm Price
$614 / each
Excl. GST
Clean Grain Elevator Chain for New Holland CR Series Combines Type: Clean grain elevator chain — heavy-duty conveyor chain with bolted paddles Moves cleaned grain from the cleaning shoe up the elevator into the grain tank. Worn or stretched chains cause spill-back, slow tank filling and uneven loading — replace before harvest to avoid downtime. Replaces OEM: 84145229 Suits: New Holland CR Series combines (CR9060, CR9070, CR9080 and compatible models — confirm per serial number). Part no: DCP-84145229 Price is each, excluding GST. Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

HEADERS & HARVESTERS IN WEROMBI NSW

Harvest time demands dependable machinery that performs under pressure. This is the place to buy a harvester that suits your crop or sell a harvester ready for its next farm. Explore listings for new harvesters and used harvesters, including farm harvesters from leading brands. Check specs, hours, and headers to make sure you’re ready for a smooth and efficient harvest season.

General Questions

Can I buy a used harvester or header on LocalAg?

Yes. Used harvesters, headers and the fronts that go with them are listed in the Machinery & Supplies category. You can browse current listings, filter by location and contact the seller directly to ask about hours, condition and service history. Every sale is backed by LocalAg's secure escrow payment system, so your money is protected until the deal is done, which matters on a machine of this value.

What brands of harvesters are listed for sale on LocalAg?

Listings come from farmers and sellers across Australia, so you will find a mix of the major harvester brands across a range of models and ages. Use the search and filters to narrow down to the brand, class size and front type you are after.

Harvesters and headers for sale near me, how do I find one?

Use the radius filter to show machines listed within 50km, 250km, 500km or 1000km of you, or browse the marketplace by map. With harvesters, many buyers look further afield for the right machine and arrange transport, and because secure escrow protects your payment until delivery, buying interstate is straightforward.

Can I sell my harvester or header on LocalAg for free?

Yes. Listing is free, so you can list your harvester, fronts or other gear, along with anything else across the marketplace, and pay nothing until it sells. A small transaction fee applies on a successful sale, split between the buyer and the seller. Full details are on the Fees & Charges page.

Can I buy harvester fronts and headers separately, including draper, stripper and comb fronts?

Yes. Harvester fronts are listed both with machines and on their own, including draper fronts, stripper fronts and comb fronts, along with the trailers to cart them. Search by type and location and confirm the fit with your harvester before you buy, since fronts are matched to specific makes and models.

How does payment work for a high-value harvester purchase on LocalAg?

The same secure system covers a harvester as any other sale. Rather than paying the seller directly, your funds are held in secure escrow and are only released once both sides confirm the transaction is complete, so your money is protected until the machine is yours. For a purchase of this size, LocalAg Plus can also help manage the contract, payment and logistics, which is well worth using on a complex, high-value deal.

Is CheckVault safe to use for a $200,000+ machinery purchase?

Yes. CheckVault is LocalAg's secure escrow partner and an established Australian payment service built for exactly this kind of high-value transaction. Your money is not handed to the seller. It is held in escrow with an independent custodian, Perpetual Corporate Trust, one of Australia's long-standing trustee companies, and is only released once you and the seller both agree the deal is done. CheckVault holds an Australian Financial Services Licence and verifies users' identities to reduce fraud, and if a dispute arises the funds stay held until it is resolved. For a six-figure harvester, that independent protection is exactly what takes the risk out of paying someone you may not have dealt with before.

How do I transport a harvester I buy on LocalAg?

Harvesters are large, often oversize loads, so most buyers arrange specialist transport with an experienced ag machinery carrier. You can organise your own freight, or for a purchase like this LocalAg Plus can help manage logistics and transport as part of the deal. Because your payment is held in secure escrow until the machine is delivered and confirmed, you can buy interstate with confidence, which matters when the best harvester for your program is in another state. National reach is one of the platform's strengths.

What should I inspect before buying a second-hand harvester?

Before you buy, it pays to check:


  1. Engine and separator or rotor hours, along with full service history
  2. The threshing and separation system, including the rotor or drum, concaves and sieves, since this is the heart of the machine and the single most important area to get right
  3. Wear points such as the feeder house, augers, elevators and chains
  4. The front and any included attachments, and that everything matches the listing


For a machine at this value, an independent pre-purchase inspection by a specialist is well worth it. Because you deal directly with the seller on LocalAg, it is easy to request records, photos and an inspection before you commit.

How many hours or hectares should a good used harvester have done?

Harvesters are usually judged on engine hours and separator or rotor hours, and sometimes on hectares or acres harvested. As a rough guide, under about 2,000 to 3,000 separator hours is considered moderate for a modern machine, while much higher counts point to heavier use. Hours and area matter less than how the machine has been maintained and stored, so always weigh them against service history and condition.

Why buy a harvester on LocalAg instead of Facebook Marketplace or Gumtree?

LocalAg is built by farmers, for farmers, and made specifically for agricultural trading. On a high-value machine that matters: you get verified users, secure escrow payments that protect six-figure sums until the deal is done, and an ag-only audience of genuine growers and sellers rather than anonymous classifieds. You deal directly with the seller, so you can ask the detailed questions a purchase like this deserves.

Is LocalAg run by farmers?

Yes. LocalAg is a family-owned, Australian business backed by Feed Central, with a team that brings together more than 100 years of combined experience in agriculture. It is built by farmers, for farmers, which is why the platform is designed around how farmers actually buy and sell rather than as a generic classifieds site.

An error has occurred. Reload 🗙