Showing 52 Results
Featured


#88711
Bale Baron (21 sm sqs)
Shedded
| Protein (CP) | 11.30 |
| Energy (ME) | 9.15 |
Ex Farm Price
$13
/ small square bale
Excl. GST
Line of Dryland Rhodes grass small squares bales into Barons. Cut with mower conditioner and cured in ideal conditions. Good texture and aroma. Some variability from contoured country.
Weather-damaged during relocation will be good for cattle or even goats.

The key to a high quality product is proper moisture monitoring with the correct & precise equipment. Whether you are producing or purchasing hay this is an opportunity for you to get the one must have tool in your hand. The Delmhorst Navigator FX- 20 moisture meter is the best for hay producers or contractors looking to enhance quality control. The Navigator FX- 20 has the ability to check hay moisture in bales or windrow, matched with class leading accuracy and clarity!
PACKAGE INCLUDES:
- Delmhorst Navigator FX-20 travel case
- 18 Inch Probe, used for testing large bales (standard is normally 10 inch).
- Electrode Probe Handle for ease of testing & minimise stress on meter casing.
- Short pin Windrow Testing Probe.
- Moisture Meter Checker to help ensure that your moisture meter is reading the correct moistures at all times.

Developed by the Feed Central Hay Inspectors, this stainless-steel hay corer is ideal for the collection of samples for quality assurance and feed testing purposes. It simply attaches to your cordless or corded 1/2" drill. This simple collection of samples helps prevent contamination from handling. To use, drill into baled forage and use the cleanout rod to push the sample into an attached bag.
The attached forage cutting tip is able to be sharpened for an extended lifespan, or able to be ordered as a repair part.
Items Included:
Hay corer
Clean out rod
Hay Corer Storage Satchel
Clip Seal bags
Forage analysis is required for animal ration balancing and proper hay and forage analysis requires a good forage sample. Taking a good sample requires a hay corer. The hay corer allows recommended samples of chopped forage to be gathered quickly and easily without contamination from handling.
Hay probe sampling procedure
Care should be taken when sampling hay. Samples should be uniformly obtained from several bales (10 bales minimum) throughout each sampling lot. Avoid sampling only one or two areas in the lot. Each sampling lot should be defined by date baled, cutting, forage type and pasture, and owner or farm name. Indicate if the hay was rained on while curing. Any significant event that could cause changes in forage quality would be reason for separating those samples into a different lot. For a large sampling lot (more than 50 bales), it is advisable to gather several hay samples for analysis.
Haylage / Wrapped Silage
Drill to the full depth of the hay probe in at least 12 random locations throughout the wrapped bales. Use the clean out rod to simply push the sample into the bag. When finished, tape the 1” holes in the haylage or wrapped silage made from the sampler.
Careful handling ensures accurate results
The handling of the hay sample is important to get accurate results. The sample cannot be exposed to air, as it will lose moisture. Samples left in the sunlight usually will have the moisture condensation on the plastic bag. Poorly sealed samples will lose fines or a portion of the sample. All of the above will affect the results. Care should be taken to keep samples in a cool location and packed securely to prevent sample spillage. Be sure that identification is secure and is written with a marking pen that is waterproof. Shipping containers should be the correct size to prevent excessive movement. Zip lock bags need to be packed securely. Do not hold samples for an extended time. Reduce risk of error by expediting analysis.
ORDER YOUR HAY CORER FROM FEED CENTRAL TODAY!

A Moisture Meter That Also Records Temperature
Moisture range: 8% – 72% Temperature range: 0° – 70° C
This advanced Hay, Straw and Silage Digital Tester provides consistent moisture and temperature tests to ensure quality bales that are safe to store.
Suitable for large and small square or round bales, it is lightweight, extremely robust, and gives a fast result.
Features:
Stainless steel probe
Automatic density compensation
Hay, straw and silage
Inbuilt memory for 64 bales and recall up to 1000
Continuous reading as you probe
Offset calibration
Rubber grip and backlit LCD
Wanted

Wanted - 1000 tonnes of Oaten or Beardless Barley Hay for a prompt delivery into Oakey, QLD.
Large square high-density bales preferred.
Seeking expressions of interest from growers with baled or soon to be baled product.
Reach out to Anthony or Nev via chats or give them a call on the number below.
