371 results

#98943
Ex Farm Price
$571
/ each
Excl. GST
Aftermarket feed drum shaft designed for John Deere combines. Built as a durable replacement for the OEM shaft used in the feederhouse drum assembly, this component restores proper drum rotation and reliable crop feeding performance. Installed at the centre of the feederhouse drum, it ensures correct alignment, reduces vibration, and maintains smooth material flow into the threshing system under demanding harvest conditions.
Type: Feed drum shaft — precision-machined, hardened steel shaft
Supports and drives the feederhouse drum, ensuring stable crop movement and preventing feeding interruptions
Replaces OEM: HXE74426
Suits: John Deere 60- and 70-Series STS combines, including 9560STS, 9660STS, 9760STS, 9860STS, and early S-Series machines using the HXE74426 drum shaft (confirm serial-specific fitment). Please confirm fitment.
Part no: DCP-HXE74426
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98942
Ex Farm Price
$393
/ each
Excl. GST
Heavy-duty aftermarket center feed shaft designed to replace OEM HXE52939 on John Deere combines. Built to match OEM specs, it keeps crop flow smooth from the feederhouse into the rotor while handling high-load harvest conditions.
Type: Center feed shaft – feeder / drive box
Supports and drives the center feed section, helping transfer material from the feederhouse into the rotor with minimal vibration, wear, and downtime.
Replaces OEM: HXE52939 (also cross-references AXE43319)
Suits: JD 60 and 70 Series STS combines, typically 9650, 9660, 9750, 9760, 9860, 9870 STS — confirm serial-specific fitment.. Please confirm fitment.
Part no: DCP-HXE52939
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98941
Ex Farm Price
$214
/ each
Excl. GST
Aftermarket feeder drum shaft designed for JD combines. This shaft supports and drives the main feeder drum, controlling crop flow from the header into the feed accelerator. Built as a heavy-duty replacement for the OEM shaft, it restores proper alignment, reduces vibration, and ensures smooth and consistent feeding performance during high-capacity harvesting.
Type: Feeder drum shaft — precision-machined, hardened steel
Supports and rotates the feeder drum to regulate crop intake and maintain smooth transfer into the feederhouse
Replaces OEM: HXE105842
Suits: JD 9650STS, 9660STS, 9750STS, 9760STS, 9860STS; JD S650, S660, S670, S680, S690 (confirm serial-specific fitment). Please confirm fitment.
Part no: DCP-HXE105842
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98940
Ex Farm Price
$7,131
/ each
Excl. GST
Aftermarket MasterCut knife drive assembly designed for John Deere grain headers. Engineered as a high-performance replacement for the standard OEM knife drive, this assembly delivers smooth, high-speed oscillation to the cutterbar for clean cutting in tough crop conditions. Installed on the left side of the header, it reduces vibration, improves cutting accuracy, and enhances overall header feeding efficiency.
Type: Knife drive assembly — heavy-duty MasterCut gearbox with oscillating drive output
Converts rotational drive power into high-speed oscillation to operate the knife sections, ensuring consistent cutting and reduced wear on the cutterbar system
Replaces OEM: MasterCut drive assembly (confirm interchange with header model)
Suits: John Deere 600 Series and compatible 700 Series grain platforms equipped for MasterCut drive systems (confirm header width and serial-specific fitment). Please confirm fitment.
Part no: DCP-MCA40FT
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98939
Ex Farm Price
$7,780
/ each
Excl. GST
Aftermarket MasterCut knife drive assembly designed for John Deere grain headers. Built as a high-performance replacement for the OEM knife drive, this assembly delivers smooth, high-speed oscillation to the cutterbar for clean cutting in all crop conditions. Installed on the left end of the header, it improves cutting efficiency, reduces vibration, and extends the life of knife sections, guards, and drive components.
Type: Knife drive assembly — heavy-duty gearbox with oscillating output shaft
Converts rotational power into oscillating motion to drive the header knife, ensuring clean cutting and smooth material flow into the feederhouse
Replaces OEM: MasterCut-compatible knife drive (confirm interchange with model-specific OEM numbers)
Suits: John Deere 600 Series and select 700 Series grain platforms equipped with MasterCut knife drive systems (confirm header width and serial-specific fitment). Please confirm fitment.
Part no: DCP-MCA35FT
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98938
Ex Farm Price
$5,705
/ each
Excl. GST
Aftermarket MasterCut knife drive assembly designed for 30ft John Deere draper fronts. Built as a high-performance replacement for the OEM drive system, this assembly delivers smooth, high-speed oscillation to the knife, ensuring clean cutting and consistent crop flow across the full 30ft platform width. Installed on the left end of the draper front, it reduces vibration, improves cutting precision, and maintains reliable performance in heavy crop and high-load harvesting conditions.
Type: Knife drive assembly — heavy-duty MasterCut gearbox with oscillating output
Converts rotational power into oscillating motion to drive the cutterbar, providing clean cutting action and reducing wear on knife sections and guards
Replaces OEM: MasterCut drive assembly (confirm compatibility with existing mounting and knife head)
Suits: 30ft John Deere draper fronts including 730D, 735D, 740D, HD30 and equivalent draper platforms using the MasterCut knife drive system (confirm serial-specific fitment). Please confirm fitment.
Part no: SKU-DCP-MCA30FT
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98937
Ex Farm Price
$454
/ each
Excl. GST
Aftermarket right-hand 35ft cutter bar designed for John Deere draper fronts. Built as a heavy-duty replacement for the OEM cutter bar section, this RH assembly supports the knife, guards, and hardware along the outer right end of a 35ft draper platform. Installed on the right-hand side of the header, it restores structural integrity, maintains proper knife alignment, and ensures clean, consistent cutting performance across the full platform width.
Type: Cutter bar — right-hand 35ft section, reinforced steel cutterbar frame
Supports the cutterbar knife and guard system on the RH side, maintaining correct cutting geometry for efficient crop flow into the draper belts
Replaces OEM: HXE80879
Suits: John Deere 35ft draper fronts including 735D, 735FD, HD35R, and equivalent platforms using the HXE80879 RH cutter bar (confirm serial-specific fitment). Please confirm fitment.
Part no: DCP-HXE80879
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98936
Ex Farm Price
$142
/ each
Excl. GST
Aftermarket knife head built for JD 600 Series platforms. Engineered to replace the OEM head and deliver reliable cutting system performance under demanding harvest conditions. Installed in the cutterbar drive train, this component ensures proper motion transfer to the knife sections and helps maintain consistent cutting results.
Type: Knife head — forged steel component
Transfers drive motion from the cutterbar drive to the knife section assemblies, sustaining reliable cutting action
Replaces OEM: AH227932
Suits: JD 600 Series fronts and headers (620F, 622F, 625F, 630F, 635F) — confirm serial-specific fitment. Please confirm fitment.
Part no: DCP-AH227932
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98935
Ex Farm Price
$128
/ each
Excl. GST
Aftermarket knife head built for JD 600 series header platforms. Made as a direct replacement for the OEM unit and engineered for harsh harvest conditions. Installed in the cutterbar drive system, this knife head supports consistent knife movement and helps maintain clean cutting performance across the width of the header.
Type: Knife head — heavy-duty forged steel component
Supports and drives the knife sections on the cutterbar, ensuring smooth reciprocating action and reducing downtime due to worn parts
Replaces OEM: H173723
Suits: JD 600 Series platforms (confirm specific model / serial-break compatibility). Please confirm fitment.
Part no: DCP-AH173723
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98934
Ex Farm Price
$884
/ each
Excl. GST
Heavy-duty aftermarket draper drive gear engineered to replace OEM CE21718. Built for long service life in high-load feeding systems on modern JD flex-draper platforms.
Type: Draper platform drive gear
Transfers drive power from the platform drive shaft to the draper belt system, ensuring smooth, even crop flow into the combine feeder house.
Replaces OEM: CE21718
Suits: JD flex-draper platforms including 630FD, 635FD, 640FD, 645FD, 735FD, 740FD, 745FD, RD35F, RD40F, RD45F, RDF35, RDF40, RDF45 — confirm serial-specific fitment.. Please confirm fitment.
Part no: DCP-CE21718
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98933
Ex Farm Price
$30
/ each
Excl. GST
Aftermarket knife drive belt designed for John Deere grain platforms. Built as a durable replacement for the OEM belt used in the knife drive system, this component delivers consistent power transfer to the cutterbar, ensuring smooth oscillation and reliable cutting performance. Installed between the knife drive pulley and wobble box, it maintains proper tension, reduces vibration, and supports efficient cutting in a wide range of crop conditions.
Type: Knife drive belt — heavy-duty, reinforced V-belt
Transfers rotational power to the knife drive system, maintaining smooth and stable cutterbar operation during harvesting
Replaces OEM: AH169548
Suits: John Deere 600 Series grain platforms including 620F, 625F, 630F, 635F, 640F, and equivalent headers using the AH169548 knife drive belt (confirm serial-specific fitment). Please confirm fitment.
Part no: DCP-AH169548
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98932
Ex Farm Price
$5
/ each
Excl. GST
Aftermarket heavy duty reel pick-up tine built as a direct replacement for OEM 47392794. It lifts and carries down crop into the knife, flexing under load so it rides over obstructions rather than breaking off.
Replaces OEM: 47392794
Part no: DCP-47392794
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.




