371 results

#98994
Ex Farm Price
$1,944
/ each
Excl. GST
Aftermarket heavy-duty unloading auger elbow designed for CIH combines. Manufactured with reinforced steel and a thicker mounting ring to handle increased grain-flow volumes and demanding harvest conditions. Installed at the transition between vertical and horizontal auger sections, this elbow improves grain movement, reduces choke points, and extends component life in the unloading system.
Type: Unloading auger elbow — reinforced heavy-duty steel construction
Redirects high-volume grain flow through the unloading system while maintaining structural strength and reducing wear at the auger transition point
Replaces OEM: 87598258 (HD variant) (also referenced as 193417C92, 193417C93, 193417C94, 248308A1, 248308A2)
Suits: CIH 1420, 1440, 1460, 1480, 1620, 1640, 1644, 1660, 1666, 1680, 1682, 1688; 2144, 2166, 2188; 2344, 2366, 2377, 2388; 2577, 2588 (confirm serial-specific fitment). Please confirm fitment.
Part no: DCP-87598258-HD
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98993
Ex Farm Price
$3,075
/ each
Excl. GST
Aftermarket unloading auger elbow designed for CIH combines. Built as a heavy-duty replacement for the original elbow in the grain discharge system, this component manages changes in flow direction and heavy grain loads during the unload cycle. Installed at the transition between the vertical and horizontal unloading auger sections, it supports efficient grain discharge and reduces stress on the auger tube and mount.
Type: Unloading auger elbow — reinforced steel construction
Redirects grain flow between auger sections while maintaining structural integrity and supporting high-capacity unloading operations
Replaces OEM: 84126361 (also referenced as 87474233, 87552529, 87754415)
Suits: CIH 5088, 5130, 5140, 5150, 6088, 6130, 6140, 6150, 7010, 7088, 7120, 7130, 7140, 7150, 7250; 8010, 8120, 8230, 8240, 8250; 9010, 9120, 9230, 9240, 9250 (confirm serial-specific fitment). Please confirm fitment.
Part no: DCP-84126361
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98992
Ex Farm Price
$410
/ each
Excl. GST
Chaffer Shaker Arm RH – Fits John Deere Combines – Replaces AH219846
Part no: DCP-AH219846
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98991
Ex Farm Price
$713
/ each
Excl. GST
Aftermarket rotor cage vane kit designed for Case IH combines. Built as a complete replacement kit for the OEM vanes installed inside the rotor cage, this set restores proper crop flow, improves separation efficiency, and reduces wear in high-volume harvesting. Installed around the inner perimeter of the rotor cage, these vanes guide crop material evenly through the threshing and separating area, improving performance in all crop conditions.
Type: Rotor cage vane kit — formed wear-resistant steel vanes with mounting hardware
Directs crop material through the rotor cage to improve separation, reduce plugging, and maintain clean grain output
Replaces OEM: 348503A1 (also referenced as 348503A2 depending on configuration)
Suits: Case IH 1680, 1688; 2144, 2166, 2188; 2344, 2366, 2377, 2388; 2577, 2588 (confirm serial-specific fitment). Please confirm fitment.
Part no: DCP-348503A1
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98990
Ex Farm Price
$778
/ each
Excl. GST
Aftermarket vane kit designed for the transition cone in CIH combines. Built to replace factory wear components inside the rotor transition area, this kit restores proper material flow from the feederhouse through the rotor, improves threshing efficiency and extends service-life in heavy crop conditions.
Type: Vane kit — 3/16″ stainless steel vanes with mounting hardware
Guides crop flow smoothly through the transition cone, protecting the cone structure and reducing wear from high-volume material transfer
Replaces OEM: 428875A2 (also cross-referenced as 428875A1, 348502A1)
Suits: CIH 1480, 1482, 1680, 1682, 1688, 2188, 2388, 2588 (confirm serial-specific fitment). Please confirm fitment.
Part no: DCP-428875A2
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98988
Ex Farm Price
$615
/ each
Excl. GST
Heavy-duty aftermarket right-hand chaffer arm assembly designed to replace OEM AH223015 on JD combines. Built from premium steel with reinforced joints to handle the cyclic motion and high-load environment of the chaffer system, ensuring consistent grain cleaning performance.
Type: Chaffer arm assembly – right side, cleaning/separation system
Connects to the chaffer framework and drives the lateral motion of the chaffer sieve, enabling effective cleaning of grain by facilitating the swing motion required for separation of crop material.
Replaces OEM: AH223015
Suits: JD S-Series combines including S650, S660, S670, S680, S690 — confirm serial-specific fitment.. Please confirm fitment.
Part no: DCP-AH223015
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98987
Ex Farm Price
$410
/ each
Excl. GST
Aftermarket left-hand side chaffer arm designed for John Deere combines. Built as a durable replacement for the OEM arm that drives and supports the chaffer assembly, this component restores correct oscillation, alignment, and smooth movement of the cleaning shoe system. Installed on the left-hand side of the chaffer mechanism, it helps maintain consistent grain cleaning performance and reduces wear on bushings, shafts, and frame components.
Type: LH chaffer arm — heavy-duty formed steel arm with precision-machined mounting points
Connects and drives the left-hand side of the chaffer assembly, ensuring stable oscillation and proper cleaning shoe operation
Replaces OEM: AH219844
Suits: John Deere 60- and 70-Series STS combines and early S-Series models using the AH219844 chaffer arm (confirm serial-specific fitment). Please confirm fitment.
Part no: DCP-AH219844
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98985
Ex Farm Price
$1,944
/ each
Excl. GST
Aftermarket PTO gear set designed for Case IH tractors and combines. Built as a durable replacement for the OEM power-take-off drive gears, this set restores smooth, reliable transfer of engine power to the PTO system. Installed inside the PTO drive housing, these gears maintain proper tooth engagement, reduce vibration, and ensure consistent performance under heavy load conditions.
Type: PTO gear set — precision-machined steel drive gears
Transfers rotational power from the engine to the PTO system, supporting smooth, efficient operation of PTO-driven equipment
Replaces OEM: 364579A1
Suits: Case IH tractors and Axial-Flow combines that specify PTO gear set 364579A1 (confirm serial-specific fitment). Please confirm fitment.
Part no: DCP-364579A1
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98984
Ex Farm Price
$1,886
/ each
Excl. GST
Suits Case IH 2388 and compatible Axial-Flow combines. Aftermarket top sieve replacing OEM 1322467C6 — adjustable steel louver construction for clean grain samples in any crop condition.
Type: Top cleaning sieve — adjustable steel frame with louvers
Controls the upper cleaning stage by regulating airflow and grain/chaff separation. Adjustable louvers allow the operator to fine-tune opening size for different crops — wider for canola, narrower for wheat. A damaged or non-adjusting sieve causes grain loss and dirty samples.
Replaces OEM: 1322467C1 / 1322467C6
Suits: Case IH 1660, 1680, 1688; 2144, 2166, 2188; 2344, 2366, 2377, 2388. Please confirm fitment.
Part no: DCP-1322467C6
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98983
Ex Farm Price
$2,269
/ each
Excl. GST
Aftermarket vertical unloading auger designed for high-capacity unload systems on JD combines. Built as a heavy-duty replacement to handle large grain volumes and continuous operation during harvest. Installed between the grain tank and the main unload system, this auger improves grain flow, reduces choke points, and maintains smooth discharge under demanding conditions.
Type: Vertical unloading auger — hardened steel flighting, heavy-duty construction
Transfers grain vertically from the tank to the horizontal unloading system, improving unload efficiency and reducing system wear
Replaces OEM: AXE18070
Suits: JD S660, S670, S680, S690, S760, S770, S780, S790 (High-Unloading-Rate systems; confirm serial-specific fitment). Please confirm fitment.
Part no: DCP-AXE18070
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98982
Ex Farm Price
$998
/ each
Excl. GST
Aftermarket feeder tube designed for CIH combines. This tube forms part of the feederhouse conveyor system, supporting smooth crop flow from the header into the threshing area. Built as a heavy-duty replacement for the OEM tube, it restores correct conveyor alignment, reduces crop restriction, and improves feeding performance in demanding harvest conditions.
Type: Feeder tube — heavy-gauge formed and welded steel assembly
Guides and supports crop material entering the feederhouse, maintaining consistent flow into the rotor or cylinder
Replaces OEM: 1989587C2 (also referenced as 1989587C1 depending on configuration)
Suits: CIH early 2300/2400 series and selected mid-range combines using this feeder tube design (confirm serial-specific fitment). Please confirm fitment.
Part no: DCP-1989587C2
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#98981
Ex Farm Price
$236
/ each
Excl. GST
Heavy-duty aftermarket hub designed to replace OEM 183333C1 on CIH combines. Built from strengthened steel to provide a durable mounting point for rotating components in the fan-drive system, ensuring long service life under harvest load.
Type: Hub – fan drive system
Serves as the central mounting hub for the cleaning-fan drive sheave, transferring rotation from the drive system to the fan shaft. Maintains alignment and reduces vibration for consistent airflow during operation.
Replaces OEM: 183333C1
Suits: CIH 1620, 1640, 1644, 1660, 1666, 1670, 1680, 1688, 2144, 2166, 2188, 2344, 2366, 2388 and other CIH machines using this fan-drive hub — confirm serial-specific fitment.. Please confirm fitment.
Part no: DCP-183333C1
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.




