371 results

#99071
Ex Farm Price
$843
/ each
Excl. GST
Upper Unloading Auger Gearbox Shaft for Dependable Equipment Performance
Type: Replaces OEM: 87331114 (also referenced as 87331113 depending on configuration)
Directs crop material across the rotor cage to maintain efficient separation and prevent buildup or plugging
Replaces OEM: 87331114 (also referenced as 87331113 depending on configuration)
Suits: CIH 7010, 7120, 7230, 8010, 8120, 8230 (confirm serial-specific fitment).
Part no: DCP-87331114
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#99070
Ex Farm Price
$78
/ each
Excl. GST
John Deere upper idler pulley for dependable combine performance
Type: Idler pulley – rotary screen / drive belt system
Maintains proper belt tension and alignment within the rotary screen or cooling-system belt drive. Reduces belt slip, stabilises rotation, and supports clean airflow and debris management.
Replaces OEM: AH169549
Suits: Commonly used on JD 9450, 9550, 9560, 9650, 9660, 9670 STS, and selected S-Series, W-Series, T-Series, and X9 combines — confirm serial-specific fitment.
Part no: DCP-AH169549
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#99069
Ex Farm Price
$1,621
/ each
Excl. GST
Heavy-duty feeder house shaft designed to replace OEM 87367599 on CIH combines. Provides stable support and rotation for the feeder chain drive system under heavy harvest load.
Type: Feeder house shaft
Supports and drives feeder house components by providing a stable rotating shaft for sprockets and bearings. Maintains correct chain alignment, reduces wear, and ensures smooth crop flow into the combine.
Replaces OEM: 87367599
Suits: CIH combines using feeder house shaft 87367599 — confirm serial-specific fitment.
Part no: DCP-87367599
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#99068
Ex Farm Price
$1,102
/ each
Excl. GST
Heavy-duty aftermarket gear set designed as a direct replacement for the OEM 87589850 set in CIH combines. Built from hardened steel to handle high load, continuous harvesting conditions.
Type: Gear set – transmission / drive gears
Transfers drive power within the feeder, fan, or transmission drive assembly, maintaining correct speed ratio and smooth operation.
Replaces OEM: 87589850
Suits: CIH 5130, 5140, 5150, 6088, 6130, 6140, 6150, 7010, 7088, 7120, 7130, 7140, 7150, 7160 — confirm serial-specific fitment.
Part no: DCP-87589850
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#99067
Ex Farm Price
$2,593
/ each
Excl. GST
Aftermarket left-hand rotor cage vane designed for CIH combines. This vane mounts inside the rotor cage and guides crop material evenly through the threshing and separating system. Built as a wear-resistant replacement for the OEM vane, it helps maintain consistent crop flow, reduces plugging, and improves separation efficiency in tough harvesting conditions.
Type: Rotor cage vane — formed wear-resistant steel
Directs crop material along the rotor cage for efficient threshing and separation while minimising internal wear
Replaces OEM: 87331084 (also referenced as 87331083 depending on configuration)
Suits: CIH 7010, 7120, 7230, 8010, 8120, 8230 (confirm serial-specific fitment).
Part no: DCP-87331084
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#99066
Ex Farm Price
$973
/ each
Excl. GST
Heavy-duty aftermarket half sheave designed to replace OEM AXE14339 on John Deere combines. Built for reliable belt-drive performance in the cleaning/fan drive system under demanding harvesting conditions.
Type: Half sheave / outer fan drive sheave
Serves as the outer sheave component in the fan drive belt system, guiding and maintaining the correct belt path and tension for the cleaning fan assembly, thereby ensuring optimal airflow and cleaning performance.
Replaces OEM: AXE14339
Suits: John Deere S-Series combines such as S660, S680, S685 and other cleaning fan drive configurations — confirm serial-specific fitment.
Part no: DCP-AXE14339
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#99065
Ex Farm Price
$3
/ each
Excl. GST
Two-piece split retractable finger holder for Case IH headers
Replaces OEM: 1308425C1D
Part no: DCP-1308425C1D
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#99064
Ex Farm Price
$67
/ each
Excl. GST
Aftermarket cleaning fan disc built as a direct replacement for OEM 86980769. It forms the end plate of the cleaning fan rotor, locating the blades and keeping airflow even across the sieves.
Replaces OEM: 86980769
Part no: DCP-86980769
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#99063
Ex Farm Price
$30
/ each
Excl. GST
Aftermarket left hand cleaning fan blade built as a direct replacement for OEM 1541570C1. It drives air through the cleaning shoe. Fan blades are handed - this is the left hand blade and should be replaced as a matched set to keep the fan balanced.
Replaces OEM: 1541570C1
Part no: DCP-1541570C1
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#99062
Ex Farm Price
$354
/ each
Excl. GST
Aftermarket left-hand chaffer shoe rail designed for Case IH Axial-Flow combines. Built as a durable replacement for the OEM rail that supports and guides the chaffer shoe assembly, this component restores correct alignment, reduces vibration, and maintains smooth oscillation of the cleaning system. Installed on the left-hand side of the cleaning shoe frame, it helps ensure consistent grain cleaning performance in high-yield harvesting conditions.
Type: LH chaffer shoe rail — formed and reinforced steel support rail
Supports and maintains alignment of the left-hand chaffer shoe assembly, ensuring stable oscillation and efficient grain separation
Replaces OEM: 1322452C2
Suits: Case IH 1644, 1666, 1688; 2144, 2166, 2188; 2344, 2366, 2377, 2388; and other Axial-Flow combines using the 1322452C2 rail (confirm serial-specific fitment).
Part no: DCP-1322452c2
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#99061
Ex Farm Price
$236
/ each
Excl. GST
Aftermarket return tailings delivery auger designed for Case IH combines. Built as a durable replacement for the OEM auger that moves tailings material from the return elevator back into the threshing system, this component restores smooth material flow and consistent crop reprocessing. Installed in the tailings handling system, it ensures efficient delivery, reduces plugging, and maintains proper crop distribution under heavy harvest loads.
Type: Tailings delivery auger — flighted steel auger, return system configuration
Moves tailings material from the return elevator into the rotor or threshing area for reprocessing, maintaining consistent separation and reducing grain loss
Replaces OEM: 192563C1 (also referenced as 1304466C1 depending on version)
Suits: Case IH 1660, 1680, 1688; 2144, 2166, 2188; 2344, 2366, 2377, 2388 (confirm serial-specific fitment).
Part no: DCP-192563C1
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.

#99060
Ex Farm Price
$973
/ each
Excl. GST
Aftermarket grain auger trough designed for CIH combines. This trough supports and encloses the clean-grain or tailings auger, preventing grain loss and ensuring smooth material movement through the lower auger system. Built as a heavy-duty replacement for the OEM trough, it restores proper fitment, reduces wear, and improves grain handling efficiency during high-capacity harvesting.
Type: Grain auger trough — formed and reinforced steel trough assembly
Supports and contains the auger for smooth grain transport, preventing grain leakage and maintaining efficient crop flow
Replaces OEM: 191645C6 (also referenced as 191645C4 depending on configuration)
Suits: CIH 1660, 1680, 1688; 2144, 2166, 2188; 2344, 2366, 2377, 2388 (confirm serial-specific fitment).
Part no: DCP-191645C6
Price is each, excluding GST.
Aftermarket part, not affiliated with the original equipment manufacturer. 12-month parts warranty. Ships Australia-wide from our Sydney warehouse. Family-owned, farmer-focused since 1986.



